- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
Rutland Powdered Creosote Remover - 2 Pound Tub
- Easy application
- Safe to use in all types of chimneys
- Reduces the chances of chimney fires
- Allows fires to burn more cleanly and efficiently
- Changes creosote into a powder that can be brushed away
- For airtight wood-burning stoves, fireplace inserts, and masonry fireplaces
Product Details
Part Number: 98 eFireplaceStore Item Number: RUT-98 UPC: 022624000983 Features
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov For more information go to www.P65Warnings.ca.gov.Wood burning fireplaces and stoves produce creosote that builds up in your chimney. Creosote remover can help because if creosote is left untreated, it can constrict the chimney passageway causing smoke buildup to enter into the room or even a fire to start in the chimney. Fortunately, there is an easy solution to preventing this problem. Merely putting a scoop of this creosote removal powder from Rutland into your fire will change the creosote into a powder that you can quickly brush away. By regularly using this creosote remover, you can reduce this problem and also help your fires burn more cleanly and efficiently. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
6 Questions &
6 Answers
Joe
from Fitchburg asked:
August 30, 2020
How should I use this product?
1 Answer
This product will not cause any collateral damage to the clay flue or surrounding masonry when used in the proper amounts. The product is designed to be applied to a well established fire and will simply dry creosote deposits within the flue through a gradual chemical reaction. The active ingredient has no effect on clay or brick. Per the manufacturer, you should initially use this product twice a week for the first month, then once weekly is acceptable. Used at these intervals, the product should last for approximately 7 months.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on September 1, 2020
Joe
from Langhorne, PA asked:
March 5, 2019
Is this product safe for stainless steel chimney liners connected to fireplace insert? What type of chimney brush should be used to clean out residue after using?
1 Answer
This would be safe to use with a chimney liner for your insert, and I would suggest using a nylon brush to clear out residue after.
Submitted by:
Brennan W.
on March 5, 2019
Phil
from NJ asked:
January 7, 2018
Hello, so would it make more sense to use it for a few days then clean the chimney & then use it to maintain? Seems to me if I use it 2 times a week without cleaning it (if there is buildup) that might pose a problem thanks.
1 Answer
I would say that would be a good route to go on keeping the chimney clean using this.
Submitted by:
Brennan W.
on January 8, 2018
Mike
from RI asked:
February 19, 2016
Will this product cause any interior damage to the mason flues, and will it cause any external damage to the chimney? Will it cause the exterior cement and paint on the chimney to crack with a hot fire inside in very cold weather outside? Is it bad to have this product in the stove upon lighting the wood stove while the fire is very hot ?
1 Answer
This product will not cause any collateral damage to the clay flue or surrounding masonry when used in the proper amounts. The product is designed to be applied to a well established fire and will simply dry creosote deposits within the flue through a gradual chemical reaction. The active ingredient has no effect on clay or brick.
Submitted by:
eFireplaceStore
on February 22, 2016
Bern
from Westminster, MD asked:
November 5, 2013
How many applications will this 2 lb tub do, and how often should it be used?
1 Answer
Per the manufacturer, you should initially use this product twice a week for the first month, then once weekly is acceptable. Used at these intervals, the product should last for approximately 7 months.
Submitted by:
Collin C. - NFI Master Hearth Professional
on November 6, 2013
B
from New York asked:
September 29, 2012
Can this also be safely used in pellet stoves?
1 Answer
While this product can be safely used in a pellet stove, it will not be as effective. The air volume traveling through a pellet vent is much less than on a sealed combustion wood burning unit and will prevent the product from circulating as well.
Submitted by:
Collin C. - NFI Master Hearth Professional
on October 1, 2012
Customer Reviews
5.0
4 Reviews
5
100% (4)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
75% Recommend this product (3 of 4 responses)
By John from
on October 25, 2020
soot remover
Excellent product.
By Kathy from
Grayling, MI on March 12, 2020
I would recommend this item to a friend.
Creosote Remover
This is the best creosote remover! You can literally hear creosote falling from inside the pipes. It is much easier and cleaner than using a spray.
By Mark from
Edinburg, VA on June 10, 2015
I would recommend this item to a friend.
Rutland Powdered Creosote Remover
Received order quickly.
By Bettie from
Fayetteville, AR on December 20, 2012
I would recommend this item to a friend.
Rutland Powdered Cresote Remover
I have had a wood stove for almost 33 yrs that I have used every winter. This stuff works better than the other products I have used and it does clean the chimney.
Works good in wood stove
