Question 1

Can you put a woodstove inside a fireplace?

Accepted Answer

Yes. Commonly known as a fireplace insert, woodstoves designed for installation in fireplaces are a great way to improve your heating efficiency. The types of woodstoves installed in factory-built fireplaces have limitations set by the fireplace manufacturer. Masonry fireplaces in good condition can easily accept a woodstove insert with the addition of an adequately sized chimney liner. Getting a level 2 inspection from a CSIA-certified chimney sweep is a great way to learn what to do before installing a woodstove insert.

Question 2

Do you need venting for a wood burning stove

Accepted Answer

Yes. Venting is essential to safely carry heat and dangerous combustion gases such as carbon monoxide out of your home. In addition, venting pulls fresh air into the stove to maintain efficiency. There are different types of venting systems available for wood burning stoves, and the type of venting you need will depend on the design of your stove and the layout of your home. Always use a venting system listed for use with your woodstove by the woodstove manufacturer. Following the manufacturers instructions and any applicable building codes or regulations is essential when installing and venting your wood burning stove.

Question 3

Is cast iron better than steel for a wood stove?

Accepted Answer

Steel is better than iron for modern woodstove manufacture. Both cast iron and steel have their advantages and disadvantages when it comes to wood stoves, and which material is better depends on a variety of factors, such as the intended use of the stove, the design of the stove, and personal preference. Cast iron stoves have a classic, rustic appearance that many people find attractive, but they are generally more expensive than steel stoves. Additionally, steel stoves heat up faster than cast iron stoves, which can be advantageous if you need to warm a room quickly. Both cast iron and steel are suitable materials for wood stoves, and the choice between the two comes down to personal preference, budget, and intended use.

Question 4

Is a wood stove safer than a fireplace?

Accepted Answer

For several reasons, a modern wood stove will be safer than a fireplace. Wood stoves have airtight doors that prevent sparks and embers from escaping, reducing the fire risk. On the other hand, fireplaces are open to the room and can allow sparks and embers to fly out, increasing the risk of starting a fire. Wood stoves, designed to burn wood more efficiently, reduce the amount of smoke and other pollutants produced, benefitting people with respiratory problems or allergies. On the other hand, fireplaces can make a lot of smoke and other harmful by-products, contributing to air pollution and respiratory problems. Brick or stone fireplaces may degrade over time and become a fire hazard. Following proper safety guidelines when using any wood-burning appliance is essential.

Question 5

Is a wood burning stove the cheapest way to heat a home?

Accepted Answer

Whether a wood-burning stove is the cheapest way to heat a home depends on various factors, such as the cost and availability of fuel, the homes size and insulation, and the stoves efficiency. In general, a wood-burning stove can be a cost-effective heating option if you have access to a reliable and affordable source of firewood. Natural gas, propane, oil, or electricity costs has risen significantly faster than wood. However, the upfront cost of purchasing and installing a wood-burning stove can be relatively high. The cost-effectiveness of a wood-burning stove also depends on the stoves efficiency and the homes size and insulation.

Question 6

Is a wood burning stove cheaper than a fireplace?

Accepted Answer

In general, a modern wood-burning stove is likely to be more cost-effective than a fireplace for several reasons. Wood-burning stoves are generally more efficient at producing heat than fireplaces. Fireplaces often lose heat up the chimney, and the fire can make a lot of smoke and other by-products that dont contribute to heat. The actual cost of installation depends on several factors which affect the final price. Wood stove chimney is usually more expensive than fireplace chimney, which can add up with taller chimneys. Fireplaces generally have higher installation costs, including framing, hearth extension, facing materials, and mantles. While the upfront cost of installing a wood-burning stove may be higher than that of a fireplace, in the long run, a stove is more cost-effective due to its greater efficiency and lower risk of fire hazards and environmental damage. Additionally, the cost of fireproofing requirements for fireplaces can add up over time.

Question 7

Is a wood burning stove better than a fireplace?

Accepted Answer

Yes! A wood-burning stove is a better choice than a fireplace for several reasons. Stoves burn wood more efficiently. In contrast, fireplaces often lose heat up the chimney, and the fire can produce a lot of smoke and other by-products that dont contribute to heat. Modern wood-burning stoves are generally safer than fireplaces. Stoves have airtight doors that prevent sparks and embers from escaping, reducing the fire risk. On the other hand, fireplaces are open to the room, and sparks and embers can easily escape and cause a fire hazard. While fireplaces can be a cozy and attractive addition to a home, wood-burning stoves are generally a better choice for efficient, safe, and environmentally friendly heating.

Question 8

Is a wood burning furnace worth it?

Accepted Answer

Wood-burning furnaces are typically located outside the home and connected to the homes heating system through underground pipes. There are also indoor wood furnaces that can provide forced air heat. Both burn various wood products, including firewood, wood chips, and wood pellets, to provide heat to the home. A wood-burning furnace can significantly reduce heating costs, especially if you have a reliable and inexpensive source of wood. Wood burning furnaces have the advantages in heat distribution you dont get with a wood stove. If you dont have access to affordable wood or prefer a low-maintenance heating system, a wood-burning furnace may not be your best choice.

Question 9

Is a wood burner cheaper than central heating?

Accepted Answer

In general, a wood-burning stove can be a more cost-effective option for heating a home than central heating, particularly if you have access to a free or inexpensive wood supply. Wood is a renewable resource; if you have access to wood that would otherwise go to waste, you can save money on heating costs. Modern wood-burning stoves are generally more efficient than open fireplaces or older stoves, producing more heat with less fuel and less pollution. Cutting and splitting wood is good exercise for the body, and watching a fire is good for the soul. Those benefits only come with a wood burner.

Question 10

Is a fireplace the same as a wood burning stove?

Accepted Answer

A fireplace and a wood-burning stove are not the same, although they both provide heat from burning wood. Fireplaces have larger openings allowing a more interactive experience with the fire. The large fireplace opening requires a larger flue to vent the excess air. As a result, fireplaces are not a suitable means of adding heat to the living space. A wood stove has a door with an airtight gasket. A small opening allows combustion air into the stove. Since it removes far less air, it removes far less heat. Modern wood stoves can mix pre-heated combustion air with the fuel evaporating from the wood. Modern wood stoves emit far less 2.5 PM pollution and CO to the environment. They can reach efficiencies between 70 and 80%, making them an excellent biomass heat source. Woodstoves are available in versions designed for installation into a wall. These are usually differentiated by calling them EPA fireplaces. Freestanding fireplaces are open-hearth appliances not intended to be installed in a wall. (Editors note: Older wood stoves do not burn nearly as efficiently or cleanly as the current generation of EPA-compliant stoves.)

Question 11

How to start a wood stove fire without smoke

Accepted Answer

Fully open the damper or air supply controls to get airflow to the fire. Wet or green wood produces more smoke, so its essential to use dry, seasoned wood. It can take up to six months for wood to dry out completely, so plan ahead.. Before starting the fire, when the flue is cold, prime the chimney by burning a rolled-up piece of newspaper on top of the fire. Warming the air in the flue will create an upward draft that will help draw smoke out of the stove. Use small, dry pieces of wood to start the fire. Dont overload the stove with wood, leading to smoke buildup. Instead, add a few small pieces of wood at a time, gradually allowing the fire to build.

Question 12

How to prevent carbon monoxide from a wood stove

Accepted Answer

A carbon monoxide detector is an essential safety device that can alert you if there are dangerous levels of carbon monoxide in your home. Install one in the same room as your wood stove, and test it regularly to ensure its working correctly. Ensure your installer vented the wood stove according to the manufacturers instructions. Ensure the stovepipe is correctly installed, free of obstructions, and inspected regularly to ensure no leaks or blockages. Burning dry wood produces less smoke and reduces carbon monoxide. Have your wood stove inspected by a professional regularly to ensure its working correctly.

Question 13

Is it cheaper to build a wood-burning fireplace or a gas fireplace?

Accepted Answer

Wood burning fireplaces require masonry or stainless steel chimney liners. Direct vent gas fireplaces vent into a smaller aluminum-lined vent pipe. The vent height for direct vent can also be much shorter. You can install vent-free gas logs in a vent-free firebox saving the cost of venting altogether. Direct-vent fireplaces usually cost more than other fireboxes because of their advanced technology and the glass used. Direct-vent gas fireplaces are like pretty furnaces with a heat exchanger that provides tangible benefits in terms of heat. Wood fireplaces produce very little heat and can be more expensive to use over time.

Question 14

Can you replace the glass on a woodstove?

Accepted Answer

Yes, it is possible to replace the glass on a wood stove. The process will vary depending on the make and model of your stove, but in general, replacing the glass will involve the following steps: Let the stove cool completely. Remove the damaged glass by unscrewing any retaining clips or screws holding it. (Check the threads on the screws and replace any in poor condition.) Then, lean the glass gasket and any remaining debris from the glass opening. A new gasket is usually needed when replacing the glass. Most wood stoves use ceramic glass that can handle high temperatures. Order an OEM part if one is still available. If not, measure the dimensions of the old glass and order a replacement that is the same size and thickness. Install the new glass by inserting it into the gasket and securing it with retaining clips or screws. Finally, light a small fire to test the new glass and ensure no air leaks through the new gasket. Its important to note that some wood stove manufacturers recommend that a professional install the replacement glass. If youre unsure about the process or have any concerns, its best to consult the manufacturers instructions or contact a professional.

Question 15

Can you still build a wood burning fireplace?

Accepted Answer

Yes, although there may be certain restrictions or requirements depending on your location and the type of fireplace you want to build. These may include provisions for the kind of fireplace, chimney height, and clearances to combustible materials. Check with your local building department to ensure your fireplace plans comply with local codes and regulations. Its also worth considering the environmental impact of wood-burning fireplaces, as they can produce harmful emissions and contribute to air pollution. If youre concerned about the ecological effects, consider a cleaner-burning, high-efficiency fireplace or alternative heating sources such as electric fireplaces.

Question 16

Can you put a wood burning stove in a house without a chimney?

Accepted Answer

Installing a wood-burning stove in a house without a chimney is possible, but you must install a venting system to exhaust the smoke and combustion gases from the stove safely. A chimney for a tall house can cost more than a stove, so dont forget to include this expense in your planning.

Question 17

Are old wood burning stoves valuable?

Accepted Answer

Old wood-burning stoves can be valuable to collectors and enthusiasts, depending on the stoves age, rarity, condition, and brand. Due to their historical significance or unique design features, antique wood stoves may be considered valuable. Old wood burning stoves will not meet current safety or clean burning requirements, but they can be of value as decorative pieces.

Question 18

Are top-loading wood stoves good?

Accepted Answer

Top-loading wood stoves can be a good option for some homeowners, depending on their needs and preferences. They are far less common in modern designs because EPA-compliant stoves rely on secondary combustion to meet EPA requirements. There are no significant advantages to top-loading stoves over front-loading stoves other than adding wood with less bending.

Question 19

Can a stove heat an entire house?

Accepted Answer

Heat distribution is the most significant challenge when trying to heat a whole house with a single stove. A stove can potentially heat an entire house, depending on the stove size and the homes layout and insulation. In general, larger stoves with higher heating capacities can heat larger areas, while smaller stoves will be more suited for heating specific rooms or smaller homes.

Question 20

Are all woodstoves airtight?

Accepted Answer

No, not all wood stoves are airtight. Modern stoves carefully balance the air that enters the stove with the demand for combustion air. Airtight wood stoves are designed to have a tight seal between the door and the body of the stove to control the amount of air that enters the stove, which helps to regulate the combustion process and improve the stoves efficiency. Newer stoves currently sold by retailers need to meet EPA emission standards and they are going to be considered airtight stoves. However, not all wood stoves have this feature. Some wood stoves are designed with a more open design, allowing more air to enter the stove and resulting in less efficient combustion. These stoves may still have a damper or other controls to regulate the amount of air that enters the stove, but they are not considered airtight. A stove that is not airtight is harder to regulate and will not burn as cleanly as a newer stove. Its important to note that the efficiency of a wood stove depends on many factors, including the stoves design, the quality of the wood burned, and how the stove operates. Airtight wood stoves are generally more efficient than non-airtight stoves. Modern stoves cost more than older stoves, but they are cleaner burning, which means they are safer and provide far more useful BTUs per cord of wood. The cost savings from lower risk and lower fuel demand is hard to measure. Its essential to choose a stove appropriate to your needs and budget and to follow the manufacturers instructions and local building codes for safe and efficient operation.

Question 21

Are wood burning stoves a good idea?

Accepted Answer

Depending on their specific needs and circumstances, wood-burning stoves can be a good idea for some homeowners. Wood stoves can offer a reliable and efficient heat source for a home, particularly in areas where electricity or gas service may not be reliable or affordable. They are also more energy efficient than traditional fireplaces. Their design burns wood cleaner and with less waste while capturing more heat. However, there are also some potential drawbacks to consider. Wood stoves require a supply of firewood, which may not be readily available or affordable for all homeowners. Additionally, they require regular cleaning and maintenance to ensure safe and efficient operation, and older stoves will produce smoke and other emissions that can affect air quality.

Question 22

How to circulate heat from a wood stove

Accepted Answer

Circulating heat from a wood stove can help distribute warmth evenly throughout a room or home. Here are some methods for spreading heat from a wood stove: Ceiling fans; Heat-powered stove fans; Open floor plan; Thermal mass; listed blowers installed per the manufacturer’s instructions.

Question 23

How long does a Vermont Casting wood stove last?

Accepted Answer

Vermont Castings is a well-known brand of wood stoves known for their quality and durability. Vermont Castings wood stoves are built to last and can provide reliable heating for many years. A new Vermont Castings wood stove can last 10 to 25 years or more with proper care and maintenance.

Question 24

How long do Napoleon wood stoves last?

Accepted Answer

Napoleon is a well-known wood stove brand that builds high-quality and durable stoves. Made from thick steel and lined with firebrick, Napoleon stoves are highly durable. Firebrick can be easily replaced to extend the life of the stove. The lifespan of a Napoleon wood stove can vary depending on several factors, such as the specific model, how well it is maintained, and frequency of use. Its essential to follow the manufacturers recommended maintenance procedures, including regular cleaning and inspection, to ensure that your Napoleon wood stove lasts as long as possible. A well-maintained Napoleon wood stove can last 10 to 30 years or more.

Question 25

How long do Buck wood stoves last?

Accepted Answer

Buck Stove is a well-known American-made manufacturer of wood stoves. They produce high-quality and durable stoves in their North Carolina factory. On average, a Buck wood stove can last anywhere from 15 to 30 years or more. Its advisable to follow the manufacturers recommended maintenance procedures, including regular cleaning and inspection, to ensure your Buck wood stove lasts as long as possible.

Question 26

How many BTUs do I need from a wood stove?

Accepted Answer

A common rule of thumb is to choose a wood stove with a BTU output of around 5,000 BTUs per hour for every 100 square feet of space you want to heat. So, for example, if youre going to heat a 1,500-square-foot space, you would need a wood stove with a BTU output of at least 75,000 BTUs per hour. Newer (since 2020) stoves can burn on lower settings without producing more creosote.    However, its important to remember that this is just a general guideline, and many other factors can affect the size of the wood stove you need. Its always a good idea to consult with a professional to help determine the appropriate BTU output for your specific needs. They can help you choose the right size and type of wood stove for your home and climate.

Question 27

How many types of stoves are there?

Accepted Answer

There are many types of stoves, each with unique features and benefits. Wood-burning stoves - They burn wood to produce heat and are known for their classic, rustic look. New modern designs, often called contemporary wood stoves, are also available. Pellet stoves - These stoves burn compressed wood pellets to produce heat and are known for their efficiency and ease of use. Gas stoves - These stoves burn natural gas or propane to produce heat. Choose these for convenience and ease of use. Electric stoves - These stoves use electricity to produce heat and are known for their convenience and ease of installation. Coal stoves - These stoves burn coal to produce heat and are common in areas where coal is abundant and relatively inexpensive. The venting for coal stoves is more expensive. Oil stoves - These stoves burn heating oil to produce heat and are used in areas where natural gas is not readily available. Multi-fuel stoves - These stoves burn various fuels, including wood, pellets, fuel corn, coal, and other biomass materials. Burn only the fuels the stove manufacturer has listed as acceptable. Cookstoves - Designed for cooking and heating, cookstoves solve multiple challenges in off-grid homes and cabins. Masonry stoves - These are built from bricks, concrete, and other masonry materials and are known for storing heat and releasing it slowly. Ethanol Stoves – Ethanol stoves are designed for unvented short-term use. They use an alcohol gel made from biomass and burn cleanly. Easy and non-permanent installation is why ethanol stoves are a popular choice for renters.

Question 28

How much do wood-burning stoves cost?

Accepted Answer

The cost of a wood-burning stove can vary widely depending on several factors, including the brand, size, style, features, and installation cost. On average, however, you can expect to pay anywhere from $1,000 to $5,000 or more for a new wood-burning stove. Tax credits available with some stoves can save up to $2,000 on the cost and installation of a wood stove.

Question 29

How much does a wood stove cost to run?

Accepted Answer

The efficiency of your wood stove can also impact its operating costs. Newer wood stoves tend to be more efficient than older models. A more efficient stove will burn less wood to produce the same heat, resulting in lower fuel costs. The fuel cost can vary depending on your location and the availability of wood in your area. Bulk wood is cheaper than cordwood. But it will require time and effort to cut and split. Stoves that meet the EPA’s 2020 new performance standards   Additionally, using a wood stove can provide a sense of self-sufficiency and independence from other energy sources. Assuming you burn four cords of wood per year and the cost of a cord of wood in your area is $200, running a wood stove would cost approximately $800 per year. This is a rough estimate.

Question 30

How much does a new wood-burning fireplace cost?

Accepted Answer

The cost will vary widely depending on several factors, including the size, efficiency, and features of the fireplace and the installation cost. On average, you can expect to pay anywhere from $1,000 to $5,000 or more for a new open wood-burning fireplace, plus venting and installation. EPA-certified fireplaces perform efficiently like woodstoves, costing $3,000 and up. Installation costs can also vary depending on the complexity of the installation, the type of chimney or flue system required, and the fireplace’s location. Basic, small fireplaces that dont require extensive installation can cost as little as $3,000. More oversized, elaborate fireplaces with custom designs, high-end finishes, and advanced features can cost upwards of $10,000.

Question 31

How much space do I need for a corner wood-burning stove?

Accepted Answer

The amount of space required for a corner wood-burning stove will depend on several factors, including the size of the stove, the clearance requirements specified by the manufacturer, and any local building codes or regulations. However, corner wood-burning stoves require a larger area than other wood stoves. Wider stoves usually need more depth than deeper, narrower stoves. Expect the stove board or hearth to come out at least 48” from the corner. Check the manufacturers specifications for the stove you are considering to ensure you meet the required clearance distances.

Question 32

How to build a hearth for a wood stove

Accepted Answer

The simplest way to build a hearth for a wood stove is to purchase a pre-manufactured stove board. These can sit directly on a combustible floor for most installations and only take a few minutes to install.

Question 33

How long do wood stoves last?

Accepted Answer

The lifespan of a wood stove can vary depending on various factors, such as the quality of the stove, how well it is maintained, and frequency of use. However, on average, a well-built and well-maintained wood stove lasts 10 to 20 years. Proper maintenance is required to achieve the stove’s full potential and lifespan.

Question 34

How to clean a wood-burning stove

Accepted Answer

Cleaning a wood-burning stove is important to maintaining its performance and safety.  Let the stove cool down completely. Before cleaning the stove, make sure it has cooled down completely. This will prevent the risk of burns or injury. Remove any ashes and debris. Use a metal scoop and ash bucket to remove ashes and debris from the stove. Wear gloves and a dust mask to protect yourself from any airborne particles. Ash Vacuums with HEPA filters can also be very helpful and will reduce airborne dust. Clean the stoves glass window. Use a stove glass cleaner and a soft cloth to clean the glass window on the stove. Avoid using abrasive cleaners or scrubbers that may damage the glass. Never use ammonia-based cleaners on stove windows. A damp rag can be used without any cleaner for quick cleaning. Make sure the glass is cool before cleaning. Clean the stoves exterior. Use a soft cloth and a non-abrasive cleaner.. Using stove polish will help restore the look of the stove. Follow the manufacturers instructions for cleaning the stoves exterior surface. Check and clean the stoves chimney. Inspect the chimney to make sure there is no buildup of creosote or other debris. Use a chimney brush to remove any buildup or blockages. Its important to note that cleaning a wood-burning stove can be complex and should be done by a qualified professional or experienced DIYer. Additionally, its recommended to have the stove and chimney inspected and cleaned by a professional chimney sweep or inspector at least once a year to ensure safe and effective operation.

Question 35

How to clean cast iron wood stove

Accepted Answer

Cleaning a cast iron stove is normally the same as cleaning any other type of stove. Modern cast iron stoves usually have a welded steel firebox and an outer cast iron case. These don’t usually require furnace cement between the stove joints. We recommend hiring a specialist for antique cast iron stoves that need air-tight joints.

Question 36

How to clean the outside of a wood-burning stove

Accepted Answer

To clean the outside of your wood stove, let it cool. Wipe it down with a dry cloth or a cloth with stove cleaner or stove polish. (Stove polish has pigment in it, so wear gloves.) If the stove has rust, you can use some steel wool to remove the rust. Use a finer grade to restore a smooth surface once the rust is mostly gone.

Question 37

How to cook on a wood stove

Accepted Answer

Cooking on a wood stove is a fun and rustic way to prepare meals, especially during the winter when the stove is already used for heating. You can prepare delicious meals using your wood stove with experimentation and patience.  Choose cookware that is suitable for use on a wood stove. Cast iron is a popular choice for cooking on a wood stove, as it is durable and can withstand high temperatures. You can also use stainless steel or other heavy-duty cookware. Keep the fire burning steadily. When cooking on a wood stove, its essential to maintain a steady fire to ensure even cooking. Add small pieces of dry wood as needed to maintain the fire. Place the cookware directly on the stove. Place the cookware directly on the stove, either on top of the stove or in the oven. You can also use a trivet to elevate the cookware above the stove’s surface. Monitor the cooking process closely. Keep an eye on your food while cooking to prevent burning or overcooking. Stir the food frequently to ensure even cooking. For dishes that require a specific internal temperature, use a meat thermometer to check the temperature of the food. Cooking on a wood stove differs from cooking on a conventional stove, so getting the hang of it may take some practice.

Question 38

How Do I Start a Fire in a Wood Burning Stove?

Accepted Answer

You can use many techniques to light a fire in a wood stove. Not all require kindling, but you will need some easy-to-light material to get the fire hot enough to sustain itself. Use newspaper: Crumple up several sheets of newspaper and place them at the bottom of the stove. Add small pieces of wood on top of the newspaper. Once the wood is burning well, add some more wood. Fatwood is a natural fire starter made from the resin-rich heartwood of pine trees. Its available at many hardware stores and online. Stack a few pieces of Fatwood in the stove. Stack a couple of dry logs on top. Light the Fatwood. Fire starter logs are a manufactured version of Fatwood available at many stores. They help start fires in wood stoves and fireplaces. Follow the instructions on the package to use the starter correctly. Do not use full-size fire logs in a wood stove.

Question 39

How Does a Wood Burning Stove Work?

Accepted Answer

Modern wood burner stoves work to combine fuel, air, and oxygen in the same place to achieve maximum combustion. The chimney pulls the heat produced through the stove to the chimney. It is absorbed through the heat exchanger to create convective heat for your home. Wood contains a variety of flammable organic gasses. A secondary combustion air supply adds warm air to the fuel as the gas escapes the wood in the early burning stages. The created turbulence mixes the fuel and oxygen at the top of the combustion chamber. With the help of an insulated baffle, they reach the ignition temperature of even the highest ignition temperature fuels. EPA-compliant stoves built since 2020 produce almost no creosote because they have practically no unburned fuel in the smoke that reaches the chimney.

Question 40

How Does a Wood Stove Fan Work?

Accepted Answer

Electric blowers for wood stoves use two controls. The first is a thermal switch. This switch closes when it gets hot, so the fan will start after the stove has warmed up. The fan will not come on when the stove is not hot enough. The second control is a fan speed control. This control limits the power going to the fan to adjust the speed. It is not the same as a regular dimmer switch because it cant provide less energy than the fan needs to start moving. Once the stove is hot and the blower comes on, adjust the fan speed so the noise is not disturbing. After that, the thermal switch automatically turns the fan on and off based on the stoves temperature.

Question 41

Is it cheaper to heat with wood or electricity?

Accepted Answer

Whether its cheaper to heat with wood or electricity depends on several factors, including the cost of electricity vs. firewood in your area, the efficiency of the heating appliances you use, and how well-insulated your home is. In general, heating with wood can be less expensive than heating with electricity if you have access to a free or low-cost source of firewood. Wood is a renewable resource that can be inexpensive, especially if you have a property with trees you use for firewood. On the other hand, electricity can be a very efficient heat source when used to power modern high-efficiency heat pumps. For homes with existing base-board electric heaters, adding a wood stove saves money most of the time.

Question 42

Is it cheaper to have a wood burner?

Accepted Answer

Whether or not its cheaper to have a wood burner depends on various factors, including the cost of firewood in your area, the efficiency of the wood burner, and how much you use it. Additionally, wood burners can be more labor-intensive than other heating methods, as youll need to chop, stack, and store firewood and regularly clean and maintain the stove. Its important to consider all of the costs and benefits before choosing a stove that is well-designed, efficient, and meets safety standards.

Stove FAQs

Need help? Ask an NFI-Certified Expert