- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
Lyemance 13 in. x 13 in. Energy-Saving Damper
- Energy-Saving Damper
- Eliminates as much as 90% of the air loss of a traditional damper
- Silicone rubber seals tight to save energy and money
- Mounts easily atop a flue tile
- Features a 32' stainless cable that drops down the flue and mounts into the firebox
- Damper always opens easily with 143 lbs. of leverage
- Includes hardware, silicone sealant, 32' cable and instructions
- *We don't recommend using top-sealing dampers with gas logs - failure to open could cause carbon monoxide to back up into the house.
- Manufacturers lifetime warranty
- Size: 13" W x 13" L
- Fits Inside Flue Size: 10" x 10" to 12 1/2" x 12 1/2"
- Height of Open Lid: 5"
Popular Accessories for this Item
Product Details
Part Number: DLEM1313 eFireplaceStore Item Number: CPF-12113 Features
|
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
8 Questions &
8 Answers
Vito V.
from CA asked:
September 28, 2022
Is there a cap with 5/8" screen that will sit on top of the 13"x13" Lyemance chimney top damper?
1 Answer
Click here for the cap for the Lyemance 13 x 13 damper.
Submitted by:
Kathy O.
on September 28, 2022
Jason S.
from Michigan asked:
December 5, 2021
My flue measures 11-1/4 by 11-3/4. Will the 13x13 fit?
1 Answer
It will fit inside flue sizes from 10 x 10 inches up to 12.5 x 12.5 inches.
Submitted by:
Kathy O.
on December 6, 2021
Ken
from Lansing MI asked:
July 21, 2019
Is the Lyemance 13 x13 damper manufacture in the United States or China?
1 Answer
While assembled in the United States, some parts used are imported from overseas, though the manufacturer does not specify.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on July 22, 2019
Lori
from Detroit, MI asked:
June 26, 2019
Do I need a chimney cap for this damper?
1 Answer
While one is not required, we can offer one that will work for this damper. Please see the <a href="https://www.efireplacestore.com/cpf-12411.html">Lyemance 13 Inch x 13 Inch Damper Cap</a>.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on June 26, 2019
Greg
from Columbus, OH asked:
November 21, 2017
When damper is in 'open' position, how open should the Damper be (what angle?).
1 Answer
Ideally, the damper will be set to a 60 degree or greater angle when in the open position. Any less may impede the draft to some degree.
Submitted by:
eFireplaceStore
on November 27, 2017
Kim
from Saint Joseph MI asked:
November 20, 2017
I can't tell what the damper is made from. Is it stainless, cast iron, aluminum?
1 Answer
I apologize for the delay in information. Per the manufacturer, this is made of cast aluminum.
Submitted by:
Brennan W.
on December 12, 2017
Amanda
from Columbus, OH asked:
December 18, 2014
Does this include the handle/pull to open the damper?
1 Answer
This product does include the operation cable that drops down the chimney flue and the mounting bracket and hardware used to hold the cable in position.
Submitted by:
eFireplaceStore
on December 18, 2014
Bob
from Chicago, IL asked:
December 7, 2014
What should I use for gas logs with this damper?
1 Answer
Only a standard cast iron damper is recommended for use with gas logs, as the close proximity of the damper to the firebox will serve as a reminder that it must be open. Top mounted dampers are not recommended, as the entire chimney can fill with dangerous levels of CO that can enter the room.
Submitted by:
eFireplaceStore
on December 8, 2014
Customer Reviews
4.6
9 Reviews
5
67% (6)
4
22% (2)
3
11% (1)
2
0% (0)
1
0% (0)
89% Recommend this product (8 of 9 responses)
By David C. from
Carrolltown, PA on September 1, 2022
I would recommend this item to a friend.
Easy install
Fit perfectly and works great.
By Peter from
Frenchville, PA on March 21, 2020
I would recommend this item to a friend.
Super easy to install.
The install took only a few minutes. It was amazingly easy. The hardest part was removing the old damper.
Pros
- Air tight seal.
- Easy install.
By Joe L. from
Ridley Park, PA on January 15, 2015
I would recommend this item to a friend.
Nice product
This was just what I was looking for . I does exactly what it says it should do . The installation was very easy and took less than an hour. The operation is much easier than reaching up for the dirty damper handle.
By Jeremy B. from
Ferndale MI on April 21, 2014
I would recommend this item to a friend.
Positive Review
I'm so happy that I purchased this product. It works well, and was so easy to get installed.
By Joan J. from
Port Townsend WA on November 7, 2011
I would recommend this item to a friend.
Nice External Flue
I currently live in Chicago, and had been noticing that I was experiencing some drafts coming in from my fireplace. I made the decision to try out this external flue to stop the drafts from entering my home from the chimney. The original flue wasn?t working very well, but the external flue stops the wind very effectively. This is really an amazing product, and does a very good job at keeping the drafts out of my home. I highly recommend it to others!
By Wanda J. from
Ada MI on May 11, 2010
I would recommend this item to a friend.
Fast Shipping
This product works exactly as it was described. It has completely sealed up my chimney, which is now dry! I'm very happy with it!
By Eric B. from
Baxter MN on October 7, 2009
Good enough to get the job done
This product was fairly simple to get installed. My only problem with mine is that there are some times when it closes completely, and other times when it only closes partially. I believe that sometimes the cable interferes and doesn?t allow it to close all the way. Other than that, I am pretty happy with this product, and would recommend it to others. Perhaps my issue with closing it is unique to mine.
By Karen W. from
Bulverde TX on September 25, 2009
I would recommend this item to a friend.
Works Very Well
Installing this product went fast and it was a very easy job. You should be careful not to tangle the wire, which could cause an extra twenty minutes or so to get it untangled. The damper comes with glue, so you won?t need to purchase any caulk. I?m very pleased with my new damper.
By Patrick L. from
Cheshire CT on February 24, 2009
I would recommend this item to a friend.
Has Worked Great So Far
We live in a very rural area. I purchased this damper in an attempt to keep the skunk odor from entering my home during the night, since our damper is not as tight as I wish it was. This damper seems to be doing a much better job, and to top it all off, installation was very easy. I recommend this product to help add insulation and to keep out smells.
