HomeSaver Non-Foil-Face FlexWrap Insulation - 1 inch x 24 inch x 5-ft. Length
Home Chimney Pipe Chimney Liner Insulation
HomeSaver Non-Foil-Face FlexWrap Insulation - 1 inch x 24 inch x 5-ft. Length

HomeSaver Non-Foil-Face FlexWrap Insulation - 1 inch x 24 inch x 5-ft. Length

Write a Review
$76.27 $99.99 24% Off
In Stock
Ships same business day.
Qty: 1

Frequently Purchased Together

Have questions?

Our NFI-certified experts are here to help!
Chat with us Chat With Us
Email your question Send a Message
Call us at 800-203-1642 Call 1-800-203-1642

Product Details

Manufacturer: HomeSaver
HomeSaver Part Numbers: 19050
Item Number: CPF-19050

Features

  • Plain FlexWrap
  • Used for sealing between the shroud of an insert and fireplace facing
  • Also used for replacing the insulation between frames of glass doors and fireplace facing
  • 1/2" x 24" x 25' roll
  • 1/2" x 48" x 25' roll
  • 1" x 24" x 25' roll
  • 1" x 48" x 5' L
Adding insulation around your chimney and chimney liner is important when installing your vent system. This insulatino is not designed to be used around the exterior of chimney liners, but it can fill in gaps along the edge of your chimney and create additional insulation for your vent system. With this sealant, you can seal the area between the shroud and facing of your fireplace, and you can replace old or worn out insulation. Each roll comes with up to 25 feet of insulation, giving you enough material to insulate a whole heating appliance.

Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.

Customer Q&A with Product Specialists

Bob from South bend, in asked:
I am looking for ceramic wrap to go around the chimney flue. About the last two feet which is single walled. That needs to be insulated so creosote does not buildup.
I am looking for ceramic wrap to go around the chimney flue. About the last two feet which is single walled. That needs to be insulated so creosote does not buildup.
This 1 Inch Thick Ceramic Wool Insulation may work best for you.
Answered by: Owen

Helpful?

0
Joelle G. from Southborough, MA asked:
Will this work for filling gaps between the brickwork and fireplace doors?
Will this work for filling gaps between the brickwork and fireplace doors?
Yes, this item will meet your needs.
Answered by: Tyler M. - Fireplace Specialist

Helpful?

0
Showing 2 of 2 Questions and Answers
Ask a Question

Customer Reviews