Part Number: 20060 eFireplaceStore Item Number: CPF-20060 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. * Please Note: This insert boot requires the use of an insert boot adaptor which is NOT INCLUDED with the purchase of this item. The insert boot adaptor must be purchased separately and is listed at the bottom of this product page. *Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions. This Cast Iron Insert Boot by HomeSaver allows for connection from one type of HomeSaver Pro or Ultra Pro 6 in. diameter chimney liner pipe. This insert boot is used when your insert exhaust dimensions are substantially different from those of the straight and offset insert adaptor. Made of 18 gauge 304 alloy stainless steel, you simply bolt the boot to the top of your insert and fit your insert boot into it. When installing an insert boot, be sure it is centered over the opening of the insert exhaust. |