Part Number: 20070
eFireplaceStore Item Number: CPF-20070
*Venting Requirements: This unit requires venting pipe with an inner diameter of 7 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: This insert boot requires the use of an insert boot adaptor which is NOT INCLUDED with the purchase of this item. The insert boot adaptor must be purchased separately and is listed at the bottom of this product page.
*Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
This insert boot by HomeSaver is made to fit any 7 inch HomeSaver Pro or UltrPro chimney liner perfectly. The cast-iron quality ensures you a long lasting product. The outside dimensions of this insert boot are 10 1/8 inches wide, 15 3/8 inches long and 5 3/8 inches high. Inner dimensions are 9 1/8 inches by 14 3/4 inches. Don't forget the separately purchased insert boot adaptor that is required to use this insert boot with your chimney liner.