- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
HomeSaver Cast-Iron Insert Boot for 8 inch Chimney Liner
- Cast-Iron Insert Boot
- Designed for HomeSaver Pro/UltraPro 8-in. diameter chimney liner pipe
- Outside Dimensions: 10-1/8" W x 15-3/8" L x 5-3/8" H
- Inner Dimensions: 9-1/8" x 14-3/4"
Popular Accessories for this Item
Product Details
Part Number: 20080 eFireplaceStore Item Number: CPF-20080 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. * Please Note: This insert boot requires the use of an insert boot adaptor which is NOT INCLUDED with the purchase of this item. The insert boot adaptor must be purchased separately and is listed at the bottom of this product page. *Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions. Sometimes, proper venting of appliances requires special adaptors. This cast iron boot covers the opening of your insert and adapts to HomeSaver's UltraPro 8-inch diameter chimney liner pipe. This solid cast iron boot is made to withstand the heat your insert produces. Choosing the right adaptor for your insert is important for the safety and proper functioning of your appliance and vent system. Use this durable cast-iron insert boot to get the job done right. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
1 Question &
1 Answer
James
from Ohio asked:
October 18, 2018
How is the boot attached to the inside of the firebox?
1 Answer
This insert boot requires the use of an insert boot adapter which is NOT INCLUDED with the purchase of this item. The adapter is connected to the firebox then the boot slides onto the adapter.
Submitted by:
Owen O.
on October 18, 2018
Customer Reviews
5.0
2 Reviews
5
100% (2)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (2 of 2 responses)
By John W. from
SW Virginia on October 10, 2021
I would recommend this item to a friend.
Heavy duty and should last a lifetime.
Very well-made and durable cast iron. Low profile lets you attach the boot to the top of the insert before sliding the unit into the hearth. Very pleased with the quality of this product.
By S W. from
United States on December 7, 2013
I would recommend this item to a friend.
Excellent product
Worked better than OEM parts.
