Free shipping
Low Price
View Cart

    Dura-Vent PelletVent Pro 4-Inch Chimney Adaptor - For Connecting to 6-Inch Dura-Vent Chimney Systems - 4PVP-X6

    List Price: $109.99
    Sale Price: $86.33
    You Save: $23.66 (22%)
    In Stock.
    * Usually Ships Same Business Day.
    See complete product details >>
    Product Details
    Free Venting Design & Quote:
    Manufacturer: DuraVent
    Part Number: 4PVP-X6
    eFireplaceStore Item Number: CPF-25362
    UPC: 662492429754


    • Connects 4" PelletVent Pro pipes to 6" DuraTech and DuraPlus chimneys
    • Sleek black finish
    • 1" clearance to combustibles
    • 7" high
    • Limited lifetime warranty
    • *Please Note: A separately purchased Close Clearance Adaptor is required

    *Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.

    * Please Note: A separately purchased Close Clearance Adaptor is required for installation.

    Create a complete ventilation system for your corn or pellet appliance with the PelletVent Pro 3" Chimney Adaptor. With this handy venting accessory, you can connect PelletVent Pro Vent Pipe to DuraTech and DuraPlus factory-built chimney systems. It features laser-welded, double-wall pipe with an inner wall of .012" stainless steel and a .018" laser-welded galvalume outer wall, and is available with a painted black exterior. Be sure to maintain 1" clearance to combustibles with this adaptor. A limited lifetime warranty is included with this product.
    Customer Questions & Answers
    1 Question & 1 Answer
    from Brazos, New Mexico asked:
    December 14, 2013
    We installed a new wood burning stove and piping (in 2012) with 18' of Dura-Vent double-walled 6" pipe into a cathedral ceiling box followed by 9' of triple-walled Dura-Vent pipe through the ceiling box and above the roof to meet the 2-10 roof clearance rules. It is a straight run from the top of the stove through the ceiling box through the top of the roof. Can we keep this basic configuration in place if we decide to switch to a pellet stove? In other words, if we replace the wood burning stove in the future, can we keep all of our existing piping in place and use the 4PVP-X6 adapter I just looked at in your forum and web site along with a new pellet stove?
    1 Answers
    You can indeed use the 4PVP-X6 adapter to utilize your current chimney system with a pellet stove. Unfortunately, the double walled DVL stovepipe in the home will not be able to be used again and will need to be replaced with the smaller diameter pellet vent pipe. However, the adapter can be installed at the ceiling to transition to the Duraplus pipe that is there now. This will keep you from having to completely redo the chimney and make any modifications outside the home.
    Collin C. - NFI Master Hearth Professional
    on December 16, 2013

    Customer Reviews

    Let Our Experts Design
    Your Venting System


    Find the Right Gas Logs
    For Your Fireplace

    Sign-up for our Email!
    Enter your email for new arrivals and special offers.