Part Number: 5DBK-ADSL eFireplaceStore Item Number: CPF-70533 UPC: 662492704080 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. You can create an entire Dura-Vent system with this DuraTech Black 5-Inch All-Fuel Stainless Steel Chimney Pipe to Dura-Black Stovepipe Adaptor. This handy venting accessory allows you to connect 5" Dura-Black Stovepipe to a DuraTech Chimney Pipe. DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100 degrees Fahrenheit HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. Tested to UL test procedures 103 HT and listed under UL re-examination service number MH 7399. Applications: 5"-8" DuraTech chimney pipe is a double-wall, all fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built. Materials and Construction: 5"-8" diameter DuraTech chimney pipe features inner wall of .020" 430 stainless steel. Outer wall options of .016" 430 stainless steel or .021" galvalume steel. A Thermal Tech (ceramic refractory) blanket insulation is encased between walls. Stainless steel end rings seal the pipe. Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399) (Stainless steel outer wall required for installation in Canada.) DuraVent Item Number: 6589 Chimney Pipe Buyers Guide How Flex Venting Helps Complicated Vent Pipe Set Up DuraVent Type B Venting Installation Guide DirectVent Pro Installation Guide Duratech Chimney Pipe Installation Guide DuraPlus Chimney Pipe Installation Guide Chimney Pipe Buying Guide Pellet Vent Pro Installation Guide Chimney Cap Buying Guide Stove Pipe (Buyers Guide) |