Part Number: 8DT-F6 eFireplaceStore Item Number: CPF-70882 UPC: 693892291832 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. * Please Note: A separately purchased Storm Collar is required for installation. Protecting a through-roof DuraTech ventilation system is simple with this aluminum roof flashing. flashing is intended for use with chimney vent pipes that have a 8 in. inner diameter, and this flashing protects and weather proofs vent terminations on roofs. This roof flashing is suitable for roofs with pitches anywhere between 0/12 to 6/12, and is made of durable aluminum construction. All DuraTech pipes and components are UL Listed and are made with .020 in. 430 stainless steel inner wall, and a .016 in. 430 stainless steel or .021 in. galvalume steel on the outer wall. |