Part Number: 8DT-F12 eFireplaceStore Item Number: CPF-70884 UPC: 693892291788 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. * Please Note: A separately purchased Storm Collar is required for installation. This roof flashing will prevent moisture and weather damage at the chimney termination for the DuraTech All-Fuel chimney on a steeply pitched roof. It is suitable for pitches from 7/12 to 12/12. It is made of aluminum and will fit the DuraTech 8" chimney pipes. It has a height of 8" and comes with a limited lifetime warranty. DuraTech chimney pipe is a double wall system that can be used with all fuels because of the ceramic insulation encased within the two walls. |