Part Number: 10DT-FC
eFireplaceStore Item Number: CPF-70897
*Venting Requirements: This unit requires venting pipe with an inner diameter of 10 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
Use this DuraTech All-Fuel Chimney Pipe Finishing Collar on the female end of DuraTech chimney pipe to create a decorative, more finished look. Designed for pipe suspended with a roof support system or passing through a wall thimble.
10"-24" large diameter DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 1700 degrees Fahrenheit rated chimney system, such as zero-clearance or masonry fireplaces, furnaces, boilers, water heaters, ranges, or other appliances fueled by oil, coal, gas, or wood. Tested to UL 103 and listed under MH 7399. Available in galvalume (GA) and stainless steel (SS) outer wall and stainless steel inner wall. Requires fastening with screws.
Applications: 10"-24" large diameter DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.
Materials and Construction: 10"-24" diameter pipe feature .027" 430 stainless steel inner wall and outer wall of .029" galvalume or .027" 430 stainless steel. A Thermal Tech (ceramic refractory) blanket insulation is encased between walls. Stainless steel end rings seal the pipe.
Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399) (Stainless steel outer wall required for installation in Canada.)
DuraVent Item Number: 10DT-FC
Chimney Pipe Buyers Guide
How Flex Venting Helps Complicated Vent Pipe Set Up
The Basics Of The Fireplace Flue
DuraVent Type B Venting Installation Guide
DirectVent Pro Installation Guide
DuraPlus Chimney Pipe Installation Guide
Duratech Chimney Pipe Installation Guide
Chimney Pipe Buying Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide