- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
DuraVent DVL Stovepipe/Chimney Pipe Adaptor With Trim - 6"
Product Details
Part Number: 6DVL-ADT eFireplaceStore Item Number: CPF-8675 UPC: 693892291184 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. Of course there's nothing more frustrating than missing a crucial component when installing any new system to your home. These adaptor rings from DuraVent help make the necessary transitions between DuraVent DVL double-wall stovepipe and DuraVent chimney pipe for vertical installations. They're constructed of durable stainless steel on the inside and galvanized steel on the outside, and each adaptor ring comes in an all-purpose, handsome matte black finish. Don't miss this important adaptor part that connects DVL double-wall stovepipe to DuraVent Ceiling Support Boxes and Round Ceiling Supports. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
7 Questions &
7 Answers
Tim
from New Castle, PA asked:
January 24, 2023
After installation would you see the screws protruding from the adaptor if viewed from above?
1 Answer
If viewed from above, they may be visible. The point of the trim is to conceal the appearance from below the adaptor.
Submitted by:
Tyler M.
on January 24, 2023
Larry J.
from Bennett, CO asked:
November 16, 2022
I need to confirm that this adapter will work going from the 6" DVL 90-degree elbow to the 6DP-WT wall thimble and 6" DuraVent DuraTech through the wall pipe.
1 Answer
The adapter will connect from your elbow to the 6" dura tech pipe. You will need to use the dura tech wall thimble, instead of the dura plus wall thimble. The dura plus wall thimble is too large for 6" dura tech chimney pipe. You can see that thimble here.
Submitted by:
Cody S.
on November 17, 2022
Dwight
November 30, 2021
Will this cover a 10" outside dia. 6" triple wall pipe?
1 Answer
No, this adaptor is only suitable to connect 6" inside diameter DVL to 6" inside diameter DuraTech.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 30, 2021
Randy R.
from Calhoun, TN asked:
July 9, 2021
Do you have a 6-inch double-wall to a 10 double wall adaptor pipe?
1 Answer
Unfortunately, we do not offer an adapter in that sizing.
Submitted by:
Aaron D.
on July 9, 2021
William
November 6, 2020
Does this adapter fit a 6” opening on my oil stove?
1 Answer
This adaptor is indeed for a flue collar with an inside diameter opening of 6 inches.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 9, 2020
Conroy
from Vermont asked:
November 12, 2019
Will a 6 inch duravent pipe twist into this, and the opposite end of that is roughly 7 inches where you place it in the chimney?
1 Answer
This part is made for Simpson DuraVent DVL double wall stovepipe which would have a 7" outside diameter, if this is what you are asking. This part would not twist into DuraVent chimney directly. Instead, this would be connected to a 6" diameter DuraTech or DuraPlus ceiling support, or a 6" DuraPlus wall thimble. For connecting DVL directly to 6" DuraTech, you would need a finishing collar.
Submitted by:
Will M.
on November 12, 2019
Courtney
from Casper, WY asked:
January 22, 2015
What are the dimensions of this adaptor and of the silver connector?
1 Answer
This connector does indeed measure right at 6 inches, as it is designed to slip around the collar of the Duratech and Duraplus support boxes and round ceiling support. The bottom section flares out to approximately 7 1/8 inches and will connect to the DVL stovepipe system.
Submitted by:
eFireplaceStore
on January 22, 2015
Customer Reviews
5.0
4 Reviews
5
100% (4)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
75% Recommend this product (3 of 4 responses)
By Ray S. from
Tennessee on December 11, 2019
I would recommend this item to a friend.
Adapter was right product
The adapter was the right connection and received at the right time.
By Jeff from
Lebanon on April 19, 2016
I would recommend this item to a friend.
Perfect product
This product was exactly what I needed to complete the installation of my new woodstove. It was the correct connection between by existing DuraVent chimney and the DVL stovepipe. The Trim ring allowed me to attach it to the chimney box with sheet metal screws preventing the adaptor from falling out of the chimney pipe, which was a problem that I encountered with a product from a different vendor which did not include the trim ring.
The delivery was very fast and this piece came exactly as advertised. It was perfect for the job and I would highly recommend the eFireplace Store to anyone needing parts and accessories for their woodstove and fireplace needs.
Easy to install. Quality materials.
None
The delivery was very fast and this piece came exactly as advertised. It was perfect for the job and I would highly recommend the eFireplace Store to anyone needing parts and accessories for their woodstove and fireplace needs.
By Clinton from
Redmond on December 22, 2015
Works exactly as expected
I was told to use the single wall version of the duravent chimney adapter but it is really hard to get a perfect connection going that route. This made my install 5% easier
By Tony from
NM on March 13, 2014
I would recommend this item to a friend.
Awesome
Great company and great product.
