- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
Empire DRB-1 Automatic Blower
Popular Accessories for this Item
Product Details
Part Number: DRB1 eFireplaceStore Item Number: CUI-DRB1 UPC: 720968050014 Features
 WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.The Empire DRB1 Automatic Blower increases the efficiency of your heater. This model is designed specifically for the models listed below. Blowers take the air warmed by the heater and help circulate it around the room more efficiently, increasing the effectiveness and range of the heater. If you have one of the listed heaters and want to maximize the effect of the heater in your home, the Empire DRB1 Automatic Blower is the perfect complement to your existing heating system. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
7 Questions &
7 Answers
Brandon
from Hammond, IN asked:
August 25, 2022
Since the heater doesn't require any sort of electricity for it to run, what is the power source for the blower kit?
1 Answer
The heater itself may not need power, but the blower runs on standard 120 V power. It has a plug to run to an outlet.
Submitted by:
Cody S.
on August 25, 2022
Martha
July 21, 2021
How many amps does the blower use?
1 Answer
This motor is rated at 2.8 amps for startup and 1.5 amps continuous.
Submitted by:
Aaron D.
on July 21, 2021
Carol M
from Mt Shasta, CA asked:
July 15, 2020
Can this Empire DRB-1 automatic blower be installed and operated without the thermostat? In other words, can it be operated manually?
1 Answer
Per the manufacturer, the fan control is a non-adjustable automatic type.
Submitted by:
Kelsey C.
on July 16, 2020
Linda
from Lyons, NY asked:
November 6, 2018
Does this blower turn off when thermostat reaches temperature? And then back on when temperature goes down?
1 Answer
This blower will turn on and off according to the temperature of the appliance and will trail slightly behind it hitting the thermostat set temperature.
Submitted by:
Cortney O.
on November 6, 2018
Todd G
from ELLENSBURG WA asked:
March 4, 2018
What is the CFM of this blower?
1 Answer
The blower output is 75 CFM.
Submitted by:
Kelsey C.
on March 5, 2018
Simon
from Revelstoke, BC asked:
November 24, 2016
What's the power consumption of the blower motor?
1 Answer
This motor is rated at 2.8 amps for startup and 1.5 amps continuous.
Submitted by:
eFireplaceStore
on November 25, 2016
Tom
from VT asked:
September 22, 2015
What is the rated power usage of this Empire DRB-1 Automatic Blower in amps or watts?
1 Answer
Per the manufacturer, the blower has a steady run rating of 65 watts.
Submitted by:
eFireplaceStore
on September 22, 2015
Customer Reviews
4.8
6 Reviews
5
83% (5)
4
17% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (6 of 6 responses)
By Peter A. from
Wheelock, VT on October 29, 2019
I would recommend this item to a friend.
Improves performance
Adds value and performance to DV 25. Easy to install. Great value!
By ProSumer from
Michigan on December 14, 2018
I would recommend this item to a friend.
Must have when accessory for Empire DV35SG Furnace
I replaced a 21 year old direct vent wall furnace with an Empire DV35SG direct vent gas wall furnace. The previous furnace did not have a blower but I'm very glad I bought this. The furnace does not run as long since the cabin heats up much quicker. Another bonus is that the wall immediately above the furnace does not get as hot. Very easy to install. The blower does not engage immediately so don't be alarmed if it takes 5-10min for it to kick in. The manual says this is normal and due to the sensor needing to heat up before the blower is engaged.
makes a good furnace great by increasing efficiency, easy to install, works perfectly.
By ROMA from
ESPANOLA on November 1, 2016
I would recommend this item to a friend.
Blower increases efficiency
The blower does an excellent job circulating the heat and warming the entire cabin.
By David from
Portsmouth on February 5, 2016
I would recommend this item to a friend.
great
blower is always a good addition
moves the heat
By John from
Kalispell, MT on December 19, 2014
I would recommend this item to a friend.
fantastic blower
Shipping was fast and efficient. The part worked perfectly and the instructions were easy to follow. Now my shop is nice and warm and we are experiencing a cold winter in Montana.
By Christopher from
ellsworth, maine on October 25, 2013
I would recommend this item to a friend.
Works Great, High Quality
Super quiet!
