Home Heaters Wall Heaters
Empire DVC35SPPXNAT Direct Vent Counterflow Wall Furnace with Standing Pilot - Natural Gas - DVC-35-SPPX-NAT

Empire DVC35SPPXNAT Direct Vent Counterflow Wall Furnace with Standing Pilot - Natural Gas - DVC-35-SPPX-NAT

Write a Review
$1,861.70 $2,289.99 19% Off
Free Shipping
In Stock
Ships same business day.
Qty: 1

Frequently Purchased Together

Have questions?

Our NFI-certified experts are here to help!
Email your question Email your question Call us at 800-203-1642 Call us at 800-203-1642

Product Details

Manufacturer: Empire
Empire Part Numbers: DVC35SPPXNAT
Item Number: CUI-DVC35SPPNAT
UPC: 720968965035

Downloads:

Features

  • Generates up to 35,000 BTUs
  • 76% A.F.U.E
  • Easily installs on outside walls
  • Can be recessed between wall studs
  • Includes counterflow blower
  • Reliable standing pilot
  • Automatic safety shut-off keeps you safe
  • Removable front panels allow convenient cleaning and servicing
  • Natural gas and propane models available
  • 10-year warranty for combustion chamber and 1-year limited warranty for parts
  • Dimensions: 72 1/2" H x 14 1/8" W x 10 3/8" D
  • Top - 4"
  • Sides - 4" or 18" with CUI-SOR1 side register
  • From bottom of unit to floor - none
This wall furnace may be the heating solution you are looking for. It installs easily on outside walls and can even be recessed between the wall studs. It uses natural and generates up to 35,000 BTU with a 76% AFUE. The unit uses a reliable standing pilot and includes a counterflow blower to help circulate the heat. An automatic safety shut-off works to keep you and your family. Cleaning and servicing is easily accomplished because the front panels are removable. The combustion chamber has a 10-yeaer warranty and there is a 1-year limited warranty for parts. The dimensions of the furnace are 72 1/2" H x 14 1/8" W x 10 3/8" D. The minimum clearances are 4" on the top, 4" on the side or 18" with CUI-SOR1 side register, 0" from bottom of unit to floor.

Venting Requirements: This item requires a chimney with 4" inner diameter.

WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

Please Note: This unit is approved for mobile home installation where not prohibited by local codes.

Also Note: This unit includes vent components required for complete installation.  Factory supplied vent components must be used.  Locally sourced or separately purchased vent components should not be used and may negatively impact the performance of this appliance.

Customer Q&A with Product Specialists

Brad from PA. asked:
It claims to be able to be recessed between studs. Doesn't that conflict with the 4" min. side clearance required if studs are 16" centers?
It claims to be able to be recessed between studs. Doesn't that conflict with the 4" min. side clearance required if studs are 16" centers?
If the heater will be recessed into a wall no greater than 10", the clearance required is zero to the top and sides. This heater is 14 1/8" and designed to fit between studs that are 16" on center.
Answered by: Will M.

Helpful?

0
Showing 1 of 1 Questions and Answers
Ask a Question

Customer Reviews

Write a Review