- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
Empire Combination Wall Thermostat and Remote Control
- Transmitter functions as either a handheld remote or wall thermostat
- Includes convenient docking station for wall mounted use
- Easily disconnects for handheld use as a remote
- Push button digital temperature set points for precise control
Product Details
Part Number: TRW eFireplaceStore Item Number: CUI-TRW UPC: 720968086815 Features
 WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.Empire thinks that for individuals that live in an era of great technological change, they should be given the needed tools to radically transform their home into something that is exceptionally user friendly. With their Wall Thermostat with Wireless Remote Control, you have two pieces of equipment that have been fabricated to give to your household all of the needed controls over the environmental settings of your home all of the time no matter where you happen to be in the house. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
29 Questions &
29 Answers
Lisa
from Buffalo, NY asked:
April 13, 2023
Will this work with the RH-50-5/ RH-65-5?
1 Answer
The RH50 and RH65 have hydraulic thermostats that are controlled by a numbered dial attached to the gas valve. They cannot be attached to an external thermostat.
Submitted by:
Cody S.
on April 14, 2023
James M.
from Taos, NM asked:
February 28, 2023
Will it work with a DV 215 NG?
1 Answer
Yes, this is compatible with the Empire DV-210-SGNAT Direct Vent Gas Wall Furnace.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on February 28, 2023
Linda
from Russell, NY asked:
February 10, 2022
Will this work with the Empire RH-35 LP?
1 Answer
The RH-35 LP has a built-in hydraulic thermostat and does not accept an external thermostat.
Submitted by:
Devon P.
on February 11, 2022
Lisa
from Pennsylvania asked:
January 15, 2022
Will this work with a 30-bp-1 unvented room heater?
1 Answer
No, this is not listed for use with that particular model.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on January 17, 2022
Sue
from Ann Arbor, MI asked:
November 12, 2021
Will this work for an Empire Vent-free 20,000 BTU millivolt stove?
1 Answer
This product will work with your millivolt stove.
Submitted by:
Devon P.
on November 12, 2021
Tracey
from Burlington, IA asked:
November 2, 2021
Will this work for an intermittent pilot model vfp36 unvented gas fireplace?
1 Answer
Yes, this will work on the Vail 36" models with the intermittent pilot ignition (VFP36BP70, VFP36BP71, VFPA36BP70 and VFPA36BP71 models).
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 2, 2021
Thomas C
from Chippewa Falls, WI asked:
January 9, 2021
What is the low setting on this thermostat?
1 Answer
The lowest setting is 36 degrees.
Submitted by:
Brennan W.
on January 10, 2021
Mark R
from Dallas, TX asked:
December 30, 2020
Will this work with the Vail 24"?
1 Answer
Yes, this will work with the Empire Vail 24" fireplace.
Submitted by:
Aaron D.
on December 30, 2020
Susan
from Newport, NH asked:
October 11, 2020
Will this work with VFD26FM30P-1 Vail FP? Does this come with a remote receiver?
1 Answer
Yes it is compatible with your model and, yes, it includes the thermostat and the receiver.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 13, 2020
Brian
November 17, 2019
Will this work with the gravity vented wall furnaces?
1 Answer
Yes, this thermostat can be used with Empire's GWT25, GWT35 and GWT50 gravity wall furnaces.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 19, 2019
Jim K.
from Oshkosh, WI asked:
November 7, 2019
Will this work with a cidv-30-1 empire stove?
1 Answer
It will absolutely work with your stove.
Submitted by:
Will M.
on November 7, 2019
Jeff T.
from Ontario, CAN asked:
November 5, 2019
Is this unit compatible with the DV 35 wall furnace?
1 Answer
This thermostat is compatible with the Empire DV35SG direct vent wall furnaces.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 6, 2019
Donald J.
October 17, 2019
Do I need to buy a wall thermostat for the propane dv35sg or does the furnace come with one?
1 Answer
The DV35SG furnaces include a thermostat, so you do not need to purchase one separately.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 17, 2019
Mark T.
from Collegre Place, WA asked:
October 3, 2019
Will this thermostat work with model # DVD3SFP31N-2 fireplace?
1 Answer
Yes, this will indeed work for your unit.
Submitted by:
Brennan W.
on October 3, 2019
Mark T.
from College Place, WA asked:
October 2, 2019
Can a novice hook this up, or should I hire an electrician?
1 Answer
That is a millivolt (low voltage) thermostat and installs similar to one on a furnace or heat pump. It would not require an electrician.
Submitted by:
Owen O.
on October 3, 2019
Mechele
from Harrisonville, PA asked:
October 1, 2019
Will this remote work for the Empire model number VFSR24-4LP?
1 Answer
Yes, that will work for your unit.
Submitted by:
Kathy O.
on October 2, 2019
Joe
from NJ asked:
September 11, 2019
Willthe Empire Combination Wall Thermostat Remote Control work with theEmpire Vail 26" Vent Free with Intermittent Pilot model #VFD26FP70L?
1 Answer
Yes, this TRW thermostat is compatible with the Empire Vail 26" model #VFD26FP70L.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on September 12, 2019
Carmine D
from East Rockaway NY asked:
May 16, 2019
My remote is not turning the fireplace on and off. I replaced the batteries in the remote. The room temperature displays and when I press on the picture of fire displays on remote but the fireplace does not come on. The fireplace turns on by manually turning the switch on transmitter or unit itself.
1 Answer
If you have changed batteries in both the transmitter and receiver, and the transmitter is still not working but the receiver is (the receiver is the box that usually has an "On/Remote/Off" switch on it, and this is connected to the valve), then it is quite possible the transmitter needs to be replaced. However, please try to re-learn/re-sync the transmitter with the receiver by following the instructions included with the remote (the initial set-up process after new batteries have been installed in both).
Submitted by:
Tyler M. - NFI Master Hearth Professional
on May 16, 2019
Nate
from STL asked:
April 12, 2019
When the temperature is reached will this turn off blower/lower gas or does it just shut off?I would prefer one that lowers its gas level (though not completely) or adjusts blower when the temp is reached.
1 Answer
It would turn the unit off. It would not control the blower at all.
Submitted by:
Owen O.
on April 12, 2019
Andy
from Manitowoc, WI asked:
March 27, 2019
Will this thermostat work with RH50-B?
1 Answer
This will indeed work with the RH50-B.
Submitted by:
Brennan W.
on March 27, 2019
Ruth D
from Henrico County, Virginia asked:
December 6, 2018
We recently purchased the Empire VFP30CA30 Heritage Vent-Free Propane Stove. Will this wall thermostat with wireless remote TRW work with the stove we purchased?
1 Answer
Yes it will
Submitted by:
Owen O.
on December 6, 2018
William S
from NC asked:
November 12, 2018
Will this work with the white mountain hearth CIVF-25-21?
1 Answer
It would.
Submitted by:
Will M.
on November 14, 2018
Clark
from Clover, SC asked:
December 31, 2017
Will this thermostat work with the White Mountain Hearth Model VFSR-30C-2. Would this take the place of the FRBTC-1 remote that I currently use? I'm thinking that the FRBTC-1 is basically the same thing.
1 Answer
This would indeed work with your unit.
Submitted by:
Brennan W.
on January 2, 2018
Brian
from WI asked:
November 19, 2017
Will this thermostat work with a Empire DV-210?
1 Answer
This will indeed work for the DV210.
Submitted by:
Brennan W.
on November 19, 2017
Andy
from MA asked:
October 8, 2017
Will this thermostat work with the DVD36FP31FP direct vent fireplace?
1 Answer
Yes, this thermostat is indeed compatible with the DVD36FP31FP unit.
Submitted by:
Tyler M.
on October 9, 2017
George
from Hudson, WI asked:
October 20, 2016
Will this work on model# DVCD36FP71N-1?
1 Answer
This will absolutely work with the electronic ignition Empire Tahoe Clean Face model. The rocker switch for the fireplace is pre-wired for a simple millivolt, On/Off remote, wall switch or thermostat like the product in question.
Submitted by:
Will M.
on October 21, 2016
Jean
from Houston, TX asked:
January 8, 2016
Will this Empire wall thermostat with wireless remote control work on VFD-26-FP30LN?
1 Answer
This will indeed work with the VFD-26-FP30LN.
Submitted by:
Will M.
on January 8, 2016
Joel
from ME asked:
March 23, 2013
Is this something I can install myself or will I have to have it professionally installed?
1 Answer
Most handy homeowners will be able to install this product without an issue. The installation is straight forward and the unit will come with detailed instructions to guide you through the installation.
Submitted by:
Collin C. - NFI Master Hearth Professional
on March 25, 2013
Ron
from Oshkosh, Wi asked:
January 31, 2012
Does this thermostat come with a receiver as well as the sensing and control unit? If so, can the receiver be placed in an inconspicuous place behind the stove?
1 Answer
Yes, this thermostat will include both a receiver and the wall-mount control unit. The receiver can indeed be hidden behind the stove.
Submitted by:
Kevin E. - Fireplace Specialist
on January 31, 2012
Customer Reviews
4.8
5 Reviews
5
80% (4)
4
20% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (5 of 5 responses)
By Mike T. from
Beaufort SC on December 13, 2014
I would recommend this item to a friend.
5 Star
Fast delivery, easy installation, everything I could ask for to automate my Empire stove.
By Donnie from
Haw River, NC on October 30, 2014
I would recommend this item to a friend.
Wireless Thermostat
Wireless thermostat works great. Purchased with the Empire VFP30CA30 Heritage Vent-Free Cast Iron Gas Stove. Comes with receiver to connect to heater to activate gas valve. Being wireless, I can place the thermostat anywhere in the room. Be sure to follow the instructions which tell how to set up receiver to communicate with the thermostat. These instructions are in the troubleshooting section of the owners manual.
Can use the thermostat as either wall-mounted or as a remote. Wireless.
Wiring instructions are a little complicated because the unit can be used on various types of heaters. The instructions for setting up the thermostat and the receiver to communicate with each other are contained in the troubleshooting section of the manual.
By John from
Clear Fork on October 27, 2014
I would recommend this item to a friend.
OK
really satisfied
By Larry from
Plattsburgh, NY on September 9, 2014
I would recommend this item to a friend.
Easy to install, works exactly as described
The entire install took less than 10 minutes. Instructions were accurate and clear.
Ease of install
By Curtis from
Siler City, NC on September 6, 2014
I would recommend this item to a friend.
Great Thermostat
Well Made,simple instructions
Wireless,easy to setup
none
