DuraVent DuraTech 11 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech
DuraVent DuraTech 11 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech
Scheduled price increase soon!
Ships same business day
Thank you!
We will send you an email notifying you as soon as this item becomes available.
Have questions?
Our NFI-certified experts are here to help!Product Details
DuraVent DuraTech 11 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech is the largest of 4 sizes: Size 8 Inches; Outside Diameter 10 inches; Inside Diameter 8 inches.
The DuraVent DuraTech 11 Inch Square Ceiling Support Box is a neat piece of equipment that helps you transition your DuraTech chimney section to your interior stovepipe right at the ceiling. This support box is handy because it works with both flat and cathedral ceilings, giving you flexibility for your setup. It's designed to hold up to a good amount of chimney, around 60 feet, so it's built to last. Plus, it comes with a trim collar and an integrated flue extension, making the installation process a bit smoother. This UL listed component is a reliable way to finish off your chimney system where it meets your home's interior.Compare This Product Line's Sizes and Options
| Model | Size | Outside Diameter | Inside Diameter | Listed Length | Shield Width | Shield Length | Price |
|---|---|---|---|---|---|---|---|
| DuraVent DuraTech Round Ceiling Support Box - For 6-Inch Inner Diameter DuraTech | 6 Inches | 8 inches | 6 inches | — | — | — | $210.81 |
| DuraVent DuraTech Unpainted Flat Ceiling Support Box - For 6-Inch Inner Diameter DuraTech | 6 Inches | 8 inches | 6 inches | — | 12 inches | 12 inches | $318.31 |
| DuraVent DuraTech 11 Inch Square Ceiling Support Box - For 7-Inch Inner Diameter DuraTech | 7 Inches | 9 inches | 7 inches | 11 inches | 13 inches | 13 inches | $384.82 |
| DuraVent DuraTech 24 Inch Square Ceiling Support Box - For 7-Inch Inner Diameter DuraTech | 7 Inches | 9 inches | 7 inches | 24 inches | 13 inches | 13 inches | $414.40 |
| DuraVent DuraTech 36 Inch Square Ceiling Support Box - For 7-Inch Inner Diameter DuraTech | 7 Inches | 9 inches | 7 inches | 36 inches | 13 inches | 13 inches | $414.49 |
| DuraVent DuraTech Round Ceiling Support Box - For 7-Inch Inner Diameter DuraTech | 7 Inches | 9 inches | 7 inches | — | — | — | $201.91 |
| DuraVent DuraTech Unpainted Flat Ceiling Support Box - For 7-Inch Inner Diameter DuraTech | 7 Inches | 9 inches | 7 inches | — | 13 inches | 13 inches | $246.62 |
| DuraVent DuraTech 11 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech | 8 Inches | 10 inches | 8 inches | 11 inches | 14 1/4 inches | 14 1/4 inches | $346.76 |
| DuraVent DuraTech 24 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech | 8 Inches | 10 inches | 8 inches | 24 inches | 14 1/4 inches | 14 1/4 inches | $447.46 |
| DuraVent DuraTech 36 Inch Square Ceiling Support Box - For 8-Inch Inner Diameter DuraTech | 8 Inches | 10 inches | 8 inches | 36 inches | 14 1/4 inches | 14 1/4 inches | $435.50 |
| DuraVent DuraTech Round Ceiling Support Box - For 8-Inch Inner Diameter DuraTech | 8 Inches | 10 inches | 8 inches | — | 9 1/2 inches | — | $226.23 |
| DuraVent DuraTech Unpainted Flat Ceiling Support Box - For 8-Inch Inner Diameter DuraTech | 8 Inches | 10 inches | 8 inches | — | 14 1/4 inches | 14 1/4 inches | $214.92 |
Customer Q&A with Product Specialists
1. Drop a plumb bob to the center of the stove flue outlet and mark that point on the rafters or roof above.
2. Frame a level, square opening between the rafters, centered on that mark. For 8-inch DuraTech, the framing dimension for the square support box is 14 1/2 x 14 1/2 inches (Table 1 in the manual).
3. Slip the support box into the framed opening so the square portion projects at least 2 inches below the rafters or finished ceiling at the lowest side of the penetration. The round collar then sits an additional 3 inches lower. The top of the box should extend up to framing or roof decking it can be fastened to. For a roof-supported install, the top edge of the box must cover the edge of the roof decking.
4. Level the box and secure it to the framing with at least three 8-penny nails per side (12 minimum total), or with #8 x 1 1/2 inch wood screws instead of nails.
5. Attach the trim to the framing members with the screws provided so it covers the box.
6. Cut the roof opening directly above, at least 4 inches larger than the chimney's outside diameter. This keeps the chimney centered with 2 inches of clearance to combustibles on all sides.
The 2-inch clearance to combustibles is maintained inside the support box itself, so the framing can sit directly against the outside of the box. The box supports up to 60 feet of DuraTech chimney.
Thank you for reaching out!
Thank you for your interest in our products. We've received your question and will get back to you shortly — usually within the hour but always within 1 business day. To ensure you receive our response, please add our email address (info@efireplacestore.com) to your email whitelist or address book.
In the meantime, while we prepare our response, keep an eye on your inbox for an email from us. We'll be sending you our exclusive Buyer's Guide, packed with valuable information to assist you in making the best decision for your needs.
If you have any further questions or need immediate assistance, feel free to reach out to us directly at 1-800-203-1642.
Thank you again for choosing eFireplaceStore.com!
Customer Reviews
Thank you!
We appreciate you taking the time to review this product. Lucky for you, we have entered you into this month's sweepstakes. Thanks again!
Your review was submitted
Thank you — your review has been received. We were not able to attach your photos, so please do not submit the review again. If you would like the photos added, contact customer service and we will attach them for you.