Empire 36" Premium Tahoe Clean-Face See-Thru Direct Vent Fireplace - Intermittent Pilot

This through-wall vent kit by Empire is designed to provide the horizontal vent for the 42" and 48" Tahoe Premium fireplaces and the 42" Tahoe Luxury fireplaces. The kit includes one termination cap, one wall thimble, necessary collars, 4 feet of 5" x 8" flexible direct vent pipe, spacers, and gear clamps. Make sure that your vent is installed according to the manufacturer's instructions and that it complies with all current safety codes and regulations.

Installing a rear vent can be quick and easy with this vent kit. This kit will give you all the parts, adapters and instruction for the install. Empire Comfort Systems make this rear vent adapter. This Empire rear vent is exclusively designed to work with and be compatible with 42 inch and 48 inch Tahoe Premium fireplaces and 42 inch Tahoe Luxury fireplaces. The kit includes one (1) 6" galvanized pipe, one (1) wall thimble, and one (1) square horizontal termination cap.

Making sure that your chimney is able to properly vent your self is a critical procedure. Since it could be the difference between having an incredible hearth and having one with average performance that might be putting your family in danger, it is critical that you let Empire give you the tools to get the job done right. Their DVVK5TP Vertical Top Vent Kit is designed to make sure that your Tahoe Fireplace functions at the level that you need for it to work.

Venting is essential when it comes to setting up your fireplace. The venting kit rids your home of unhealthy exhaust to keep you and your family safe. A vertical direct vent kit like this one by Empire does its job and does it safely if properly installed. This vent kit comes with a storm collar, flashing, and flex vent connector.

This direct vent pipe section by DirectVent Pro can be used to vent direct vent gas or propane stoves, heaters, and fireplaces. It is made with a 0.020" aluminum inner wall and 26-gauge galvanized steel outer wall. It has a 5" inner diameter and an 8" outer diameter. The sections connect with twist lock technology without fasteners. The exterior has a galvanized galvalume finish. You can order this pipe section in four different lengths in order to create the vent of the correct length for your installation. It carries a limited lifetime warranty.

This vent pipe extension is corrosion resistant galvanized steel. This extension is designed to vent direct vent gas and propane stoves, fireplaces and heaters. This extension adds length to the pipe. This vent pipe extension is made by Direct Vent Pro and will work with perfect compatibility with other Direct Vent Pro vent components. . The inner diameter measures four inches and the outer diameter measures seven inches. You have everything you need for an easy installation.

This direct vent pipe section by DirectVent Pro can be used to vent direct vent gas or propane stoves, heaters, and fireplaces. It is made with a 0.020" aluminum inner wall and 26-gauge galvanized steel outer wall. It has a 5" inner diameter and an 8" outer diameter. The sections connect with twist lock technology without fasteners. The exterior has a galvanized galvalume finish. You can order this pipe section in four different lengths in order to create the vent of the correct length for your installation. It carries a limited lifetime warranty.

This Adjustable Galvanized Vent Pipe from DirectVent Pro is ideal for use with direct vent gas or propane stoves, heaters, and fireplaces. This pipe features a durable aluminum and galvanized steel construction designed to withstand frequent use, and a unique Twist Lock connection system that eliminates the need for cumbersome fasteners. With its 5" inner diameter and 8" outer diameter and adjustable length, you'll love the versatility this pipe provides. A limited lifetime warranty is included with this item.

Why not purchase a product that will guarantee that your chimney will function at peak efficiency all of the time? With the Dura-Vent DirectVent Pro Galvanized 12-Inch Vent Pipe with 5-Inch Inner Diameter you have a product that will provide the best service possible both to you and to your chimney. Be sure you have the right pipe for the job by getting this Dura-Vent DirectVent Pro Galvanized 12-Inch Vent Pipe with 5-Inch Inner Diameter - 58DVA-12.

This vent pipe extension is corrosion resistant galvanized steel. This extension is designed to vent direct vent gas and propane stoves, fireplaces and heaters. This extension adds length to the pipe. This vent pipe extension is made by Direct Vent Pro and will work with perfect compatibility with other Direct Vent Pro vent components. . The inner diameter measures four inches and the outer diameter measures seven inches. You have everything you need for an easy installation.

Use this tough Galvanized 24" Vent Pipe for your direct vent gas or propane stove, heater, or fireplace. Its durable aluminum and galvanized steel construction is designed to withstand frequent use, and its unique connection system eliminates the need for cumbersome fasteners. This pipe features an 8" outer diameter and 5" inner diameter. Its .020 aluminum inner wall and 26-gauge galvanized steel outer wall are the last word in enduring protection.

Efficiently vent you direct vent gas or propane appliances with DirectVent Pro products like this galvanized vent pipe for a chimney with a 5" inner diameter. The pipe is constructed with a .020" aluminum inner all and a 26 gauge galvanized steel outer wall. The inner diameter is 5" and the outer diameter measures 8". Installation is easy with DirectVent Pro's twist lock connections. This particular pipe has a 36-inch length suitable in a variety of applications. DirectVent Pro provides a limited lifetime warranty on this pipe.

Before you begin the process of installing a chimney, you need to make sure that you have all of the necessary materials to get the job done and to get it done right. With the Dura-Vent DirectVent Pro Galvanized 48-Inch Vent Pipe with 5-Inch Inner Diameter, you have a quality pipe suitable for a variety of applications to make your venting installation secure and convenient.

This direct vent pipe section by DirectVent Pro can be used to vent direct vent gas or propane stoves, heaters, and fireplaces. It is made with a 0.020" aluminum inner wall and 26-gauge galvanized steel outer wall. It has a 5" inner diameter and an 8" outer diameter. The sections connect with twist lock technology without fasteners. The exterior has a galvanized galvalume finish. You can order this pipe section in four different lengths in order to create the vent of the correct length for your installation. It carries a limited lifetime warranty.

Swivel convenience is what this pip elbow offers for Your venting installations. Designed to make offsetting venting obstructions easy, simply attach this elbow to Your pipe, this swivel to align it with the next one. Crafted with double wall stainless steel constructrion, this pipe elbow is designed for use with most direct vent appliances. Troublesome turns are made easy with the ingenious design of this elbow, and is the perfect match for Your DirectVent Pro installation.

Swivel convenience is what this pip elbow offers for Your venting installations. Designed to make offsetting venting obstructions easy, simply attach this elbow to Your pipe, this swivel to align it with the next one. Crafted with double wall stainless steel constructrion, this pipe elbow is designed for use with most direct vent appliances. Troublesome turns are made easy with the ingenious design of this elbow, and is the perfect match for Your DirectVent Pro installation.

A ceiling firestop is required at every level when installing a vertical direct vent system in a multi-story building. The firestop insulates the combustible materials from the heat of the chimney and provides support for the vent system. This item is compatible with DirectVent Pro venting components and can be used with most direct vent appliances. There is a limited lifetime warranty on this item. Its dimensions are 12.5" H x 10.5" W and it has an 8" pipe opening.

This thimble will act a wall pass-through and a firestop for direct vent piping. This both gives support to the vent and protects the surrounding combustible materials from the heat of the combustion products. This item is designed for use with the DirectVent Pro Horizontal High Wind Rain Cap. Its dimensions are: pipe opening 8", height 12.5" and width 12.5". A framed 10" opening is required for installation. This item may be required in Canada.

If you need to vent a direct vent appliance through your attic space, then you need extra protection. This insulation shield is designed to fit over pipes with a 5-inch inner diameter and an 8-inch outer diameter to keep insulation away from hot ventilation pipes; such an accumulation near these pipes could pose a fire hazard. The shield still provides the 1-inch clearance needed for combustibles. The dual construction allows combustion air to get to the appliance while at the same time removing flue gases to the outside, all while preventing attic insulation from coming in contact with a heat source.

Do you want the supplies to insure that the chimney installation process is not only a smooth but also and efficient one? If so then the Dura-Vent DirectVent Pro Adjustable Pitch Roof Flashing is an item that you need to explore in detail. Designed specifically for vent pipes with a 5 inch inner diameter, you won't find a better product anywhere. You will need to purchase a storm collar separately in order to install it, but once everything has been gather, you will be amazed at how easy the installation process is.

Do you want the supplies to insure that the chimney installation process is not only a smooth but also and efficient one? If so then the Dura-Vent DirectVent Pro Adjustable Pitch Roof Flashing is an item that you need to explore in detail. Designed specifically for vent pipes with a 5 inch inner diameter, you won't find a better product anywhere. You will need to purchase a storm collar separately in order to install it, but once everything has been gather, you will be amazed at how easy the installation process is.

The flashing around the roof vent is what keeps the rain out of your house during bad weather. Its correct installation is a very important consideration for your home. This flashing is designed specifically for metal and tile roofs. It is made with malleable dead soft aluminum that can be molded to any roof shape that is surrounding the roof termination. It is completely compatible with DirectVent Pro venting components. It has an 8" pipe opening. A limited lifetime warranty is included.

Installed flashing can provide great weather protection for a direct vent system, but if you don't have a good seal between it and the terminating pipe, then your home is susceptible to the full force of the elements. Dura-Vent can insure that you have the best moisture defense possible with the design of their storm collar that creates weather-resistant seal between direct vent piping and flashing. Keep all your vents free of potential rain damage when you place this collar between the pipe and flashing.

This high quality vent rain cap is designed to function and protect in high winds. It is made from durable aluminum. Made by Direct Vent Pro, use with other Direct Vent Pro products for easy installation and compatibility. The dimensions of the rain cap include an eight inch pipe opening , 12 3/8 inches high and 10 1/2 inches in diameter. This vent rain cap is made to be used with through the wall vertical installations.

This cap is designed for use with DirectVent Pro products and is used to protect a direct vent termination from damage by rain or snow. It should be used with vertical through-wall installations. The part is made of durable aluminum and comes with a limited lifetime warranty. The cap has a pipe opening of 8" and has exterior dimensions of 8 5/8" H x 14.5" Dia. Using parts that are designed to work together is a good way to ensure a safe and efficient vent system.

Protect your horizontal vent from high wind and rain with this rain cap It features aluminum construction and will work with five inch vent pipes with five inch inner diameter. This coaxial venting system is designed for when you need to direct vent gas and propane stoves, heater or fireplaces. The inner wall is made from .020 inch aluminum. the outer wall is made from .018 inch galvanized steel. The rain cap is made Direct Vent Pro and carries a limited lifetime warranty.

A termination cap is must for any ventilation system. The DuraVent DirectVent 5x8 Sconce Termination Cap works great on many appliances. This termination cap can be a part of your ventilation system for a propane or gas stove, heater, or fireplace. This DuraVent product works for standard terminations or through-the-wall terminations. DuraVent manufactures this product in three colors.

Improve your ventilation systems performance in high-wind conditions with this DuraVent sconce cap. The DuraVent DirectVent High Wind Sconce Cap works great on many appliances. This high-wind sconce cap will fit the ventilation system of a propane or gas stove, heater, or fireplace. This DuraVent product works for standard terminations or through-the-wall terminations. In this package you'll find a heat deflector that will extend your high wind sconce caps lifetime.