Empire Corner Mantel and Tahoe Deluxe 32 Inch Direct Vent Fireplace- IPI Pilot

Venting your new direct vent appliance doesn't have to be a hassle and a half, and Empire has bundled everything you need in one convenient fireplace venting kit. The DVVK-4F kit includes just what you need to horizontally vent your new Tahoe Deluxe, Boulevard, Loft, or other Empire fireplaces. This direct vent kit includes flexible four-foot lengths of inner and outer pipework and even comes with a heat deflector to protect your home's vinyl siding.

Fireplaces come in complete packages, and this rear vent kit completes the Tahoe package. Including 6 inches of galvanized pipe which connects to the wall thimble, this kit provides the horizontal rear ventilation needed for a Tahoe fireplace. In addition, the hi-wind cap ensures consistent ventilation without the effect of exterior weather conditions. This kit is designed for 5 inch to 7 inch exterior walls, providing all that is necessary to complete your Tahoe fireplace.

This efficient product will offset any potential venting obstructions that may occur within Your venting system. This design is also vents direct vent gas or propane stoves, heaters, and fireplaces so that Your home can experience optimal heating effects. Constructed of the most durable material, this model comes with a .020 aluminum inner wall and 26-gauge galvanized steel outer wall, 4" inner diameter with 6 5/8" outer diameter, and the convenience of twist lock connections provide secure installation without fasteners.

If your ventilation installation requires a minimum vent height, this DirectVent Pro Snorkel vent termination cap will provide that additional height. Manufactured by Dura-Vent this termination cap allows direct vent systems to meet minimum height requirements while providing a unitized, coaxial venting system that is designed for use with direct vent gas or propane heaters and fireplaces. Made with .020 in. aluminum inner wall, and .018 in. galvanized steel outer wall, this termination cap is compatible with DirectVent Pro venting products and is available in 2 sizes.

Get the best wind protection available with Dura-Vent's DirectVent Pro Horizontal Wind Guard for Vent Rain Caps. This direct venting accessory will prevent even harsh winds from damaging any vent system. And for vents with terminations close to the ground, you can use this guard to keep passersby, particularly children, from coming into accidental contact with the hot rain cap.

Dura-Vent is well-known in the hearth service industry for producing reliable and cost-effective products. Their DirectVent Pro line illustrates exactly why they have earned such a reputation. Approved for use with most direct vent appliances, the DirectVent Pro venting system includes a variety of unique items, such as this Horizontal Wind Guard, to help every installation go as quickly and smoothly as possible. And homeowners always like this line because, in addition to providing attractive and efficient venting, each piece comes with a limited lifetime warranty. With DirectVent Pro, everyone wins.

*Please Note: Must be used with a DirectVent Pro Vent Rain Cap.

Applications - DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces.

Materials and Construction - .020" aluminum inner wall. .018" galvanized steel outer wall. Painted outer walls made of laser-welded .018" galvalume steel. Outer pipe brings combustion air to the appliance. Inner pipe exhausts flue gases to the outside. Gaskets or sealants not required (unless specified by the appliance manufacturer).

Clearances - Specified by the appliance manufacturer.

Listings - DirectVent Pro, in combination with the gas appliance, has been tested and listed as a decorative gas appliance system or as a direct vent heater system by a major testing agency, such as UL, CSA, Warnock Hersey, or OMNI.

DuraVent Item Number: 46DVA-WG

This galvanized vent pipe is adjustable. It is to be used with direct vent natural gas or propane stoves, heater and fireplaces. The inner wall is made from .020 aluminum and the outer is made from 26 gauge galvanized steel. The inner diameter measures four inches and the outer diameter measures 6 5/8 inches. The secure twist lock feature means it connects easily with other components. with same twist lock feature. There is only some twisting required.

DirectVent Pro knows that sometimes you will need to extend the vent of your fireplace away from your roof. The possible reasons for such a procedure are numerous, but in the end, you need a viable choice regardless of the reason. The Dura-Vent Galvanized Vent Pipe Extension comes with a 4 inch inner diameter and is able to provide you with the resources that you need to make sure that all of your objectives are attained.