- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
Superior 8DM and 8HT 0/12 to 6/12 Pitch Roof Flashing - For 8-Inch Inner Diameter Superior Chimneys
Popular Accessories for this Item
Product Details
Part Number: V6F-8DM eFireplaceStore Item Number: FSD-V6F-8DM UPC: 043593041005 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. The IHP/Superior Wood Fireplace 0-6/12 Pitch Roof Flashing is to be used with IHP/Superior wood burning fireplaces. It is available for eight inch diameter and twelve inch diameter chimney venting pipes. It offers approved protection with IHP/Superior wood fireplace chimney liners and chimney liner accessories for IHP/Superior wood fireplaces. It is not approved to be use with any other products outside of IHP/Superior wood burning fireplaces. The 0 - 6/12 Pitch Roof Flashing is only available for 8 inch and 12 inch chimneys. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
4 Questions &
4 Answers
Tim
from Harrisburg, pa asked:
May 27, 2019
Do I use this flashing for superior 8” double wall chimney pipe?
1 Answer
Yes, this flashing is designed for Superior's 8DM chimney pipe, which has an 8-inch inside diameter and a 12 3/8-inch outside diameter.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on May 28, 2019
Adam L
May 14, 2019
Will this work on a 4/12 pitch metal roof?
1 Answer
While traditionally used for a wood deck/shingle roof, this flashing can be used on a metal roof as per the instructions from the manufacturer. Please note it is a flashing specifically made for the 8DM model chimney pipe, which has a 12 3/8" outside diameter.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on May 15, 2019
Peggy C
from Indiana asked:
February 22, 2019
What is the outer diameter?
1 Answer
The outer diameter is 12 3/8".
Submitted by:
Brennan W.
on February 22, 2019
Bob
from Burns, OR asked:
October 24, 2017
What are the dimensions of the flat part?
1 Answer
The flat part of the flashing is 30" x 30".
Submitted by:
Brennan W.
on October 24, 2017
Customer Reviews
Review Summary
4.6
5 Reviews
5
60% (3)
4
40% (2)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (5 of 5 responses)
By lllooneyyy from
McComb, MS on August 29, 2018
I would recommend this item to a friend.
Good Item but Bent in Shipping
This is a well made quality item. It arrived quickly, but the flange was bent in transit. I was able to straighten it well enough to install it.
Well made item. Quick shipping.
Shipper not careful with packages.
By Dennis from
BELFAST on November 26, 2016
I would recommend this item to a friend.
Prompt service
The roof flashing was not shipped with the original order. I ask for the item to be shipped as soon as possible and they delivered in time for the installation.
By Larry c. from
Petal MS on March 26, 2015
I would recommend this item to a friend.
What I needed
worked great
right fit
By Kris from
Oklahoma on December 11, 2014
I would recommend this item to a friend.
Works well
Does the job and fits the corresponding chimney pipe well - not much space at the top of the cone where the pipe penetrates. Seems like it will be leak-free. Pricey for a couple pieces of stamped-steel, but if it lasts 20 years, then the price isn't too bad.
By Ken from
Springfield, IL on December 6, 2011
I would recommend this item to a friend.
Flashing
Flashing
