In order to light the pilot with this valve, the control knob must be rotated so that it lines up with the metal "arrow" that is stamped into the valve. The knob can then be pressed down, while pushing the spark ignitor on the unit to light the pilot. If the unit has no spark ignitor, a lighter or match must be used. Continue pushing the knob for 45-60 seconds to allow the thermocouple to heat up. The knob can then be released and the unit can be turned on by rotating the knob to the on position.
Submitted by:Collin C. - NFI Master Hearth Professional on April 1, 2013