Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Free Venting Design & Quote:
Manufacturer:Invicta Part Number: 6129-04 eFireplaceStore Item Number: INV-6129-04
Size: 36 Inches
Product Dimensions: 35 3/4" W x 25" H x 19" D
5-year limited warranty
Ecolabel A for energy efficiency
Stylish and contemporary design
Optimal heating power and range
CSA certified in the US and Canada
Linear double-sided glass viewing area
Enhanced thermal conductivity and durability
Manufactured from 100% recyclable cast iron material
Suitable for use with optional 39" or 60" support bench
Max BTU Output with Dry Cordwood: 90,000
Recommended Heating Area: 2,200 - 3,500 sq. ft.
Glass Viewing Area: 30" W x 14" H
Maximum Log Size: 30"
63% efficient based on an EPA-specified test method (CSA B 415-10 stack loss method). Actual efficiency will vary.
Clearance from top of stove to ceiling: 60"
*Venting Requirements: This unit requires venting pipe with an inner diameter of 7 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. * Please Note: Do not connect the stove to any hot air distribution system.
*Also Note: This appliance must be installed on a non-combustible protector that extends to the front, sides, and back of the appliance.
Hope you don't have a hard time making decisions, because the Invicta 36 inch Aaron model wood stove gives you a double sided view of the fire. The wide screen glass offers two perfect views of the fire and the cast iron box means you're perfectly safe to watch from anywhere. But which if the side you'll relax on? That's on you, the choice is too hard for us to make.
Does the outside enclosure gets hot or is it insulated? Could someone brush against it and get burned? Does the heat radiate from the unit without any powered venting? Or is powered venting an option? Is a hearth board required?
Yes, the stove itself gets quote hot, and proper clearances must be maintained to prevent burning and possible combustion. Yes, heat radiates from the stove, but, no, power venting is not an option - you must install a vertical manufactured chimney that terminates with the proper height above the roof. Yes, a stove board/hearth pad must be used under any freestanding wood stove that is installed on any combustible surface.
Submitted by:Tyler M. - NFI Master Hearth Professional on April 5, 2021