22 Questions &
22 Answers
Manuel F
from Campbell River asked:
March 9, 2022
Will this work with my Napolean gas fireplace GID 3014-N?
1 Answer
Yes, this is compatible.
Submitted by:
Devon P.
on March 9, 2022
Most Helpful Answer
Mark C
from Springbrook, IA asked:
January 27, 2022
Will this W660-0081 thermostat work with a Napoleon GD36NTR or BGD36 NTR?
1 Answer
Yes, this thermostat will work on either of those models listed.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on January 27, 2022
Most Helpful Answer
Leslie S
from Salmon, ID asked:
September 26, 2021
Is it possible to connect this thermostat to a napoleon GDS25P-1?
1 Answer
Yes, this thermostat can be used on your stove if indeed you are currently using a battery-operated remote control.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on September 28, 2021
Most Helpful Answer
Does it require an electrical connection to the stove? Is it blue tooth or hardwired?
1 Answer
This is a millivolt wall thermostat that connects to the valve on a compatible fireplace with two leads, so it is indeed wired. It does not require electricity and does not offer Bluetooth connectivity.
You can see the installation instructions here.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on March 8, 2021
Most Helpful Answer
Brenda C.
from West Milton, OH asked:
October 21, 2020
Does Napoleon thermostat turn the b46NTR fireplace off when the temperature gets too high?
1 Answer
Yes, this thermostat is compatible with the B46NTR fireplace and it will turn the fireplace on and off based on the temperature you set versus the temperature in the room.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 22, 2020
Most Helpful Answer
Tom
from MN asked:
October 20, 2020
Will this thermostat work with Napoleon Propane Gas Model GD36PTR and BGD36PTR?
1 Answer
Yes, this is a wired digital wall thermostat that is compatible with these models.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 21, 2020
Most Helpful Answer
Will this thermostat work on a Napoleon GD/ CDV36 gas fireplace?
1 Answer
This thermostat is compatible with an standing pilot millivolt gas fireplace.
Submitted by:
Will M.
on October 2, 2020
Most Helpful Answer
Hazel
from Peterborough, ON asked:
September 8, 2020
How do you replace battery in thermostat?
1 Answer
The batteries are located on the back side of the outer cover. You will need to remove the outer cover to access the battreries. This can be done by gently prying with a small flat screwdriver between the outer and base cover to "pop" off the outer cover.
Submitted by:
Aaron D.
on September 9, 2020
Most Helpful Answer
Peter
from Fish Creek. WI asked:
October 27, 2019
My napoleon thermostat display goes blank occasionally. I changed the batteries but it didn’t solve the problem?
1 Answer
Without knowing exactly which thermostat that you have, please note that the screen on the thermostat in question will go blank while in the Off position or when the battery voltage is low. If neither apply, you could try resetting the thermostat to factory defaults by pressing the Up and Down buttons at the same time while moving the main switch from Off to Heat.
Submitted by:
Will M.
on October 29, 2019
Most Helpful Answer
Taylor
from Maine asked:
September 20, 2019
Will this work with a timberwolf economizer tps 35?
1 Answer
This would indeed work.
Submitted by:
Will M.
on September 20, 2019
Most Helpful Answer
Where can I get an Installation Manual for this product?
1 Answer
These installation instructions may be found
here.
Submitted by:
Will M.
on June 25, 2019
Most Helpful Answer
Alexandru N
from Whitby Ont asked:
March 3, 2019
How do I install this device?
1 Answer
This thermostat has a remote receiver that connects to your gas valve. The thermostat is then mounted on the wall and will communicate with the receiver to turn the unit on and off based on the temperature you have set.
Submitted by:
Brennan W.
on March 4, 2019
Most Helpful Answer
Madeline K.
from NJ asked:
January 14, 2019
Does this thermostat require a battery?
1 Answer
Yes.
Submitted by:
Owen O.
on January 15, 2019
Most Helpful Answer
DC
from Maryland asked:
March 9, 2018
Do you sell the wiring needed to connect this thermostat to my Napoleon free standing fireplace (GDS28)?
1 Answer
This thermostat should come with the low voltage wiring needed to install it to your fireplace.
Submitted by:
Kelsey C.
on March 9, 2018
Most Helpful Answer
Don T
from Cambridge mn asked:
January 30, 2018
What's the dimension?
1 Answer
This product measures 5 5/16”H x 3 3/16”W x 1 1/8”D.
Submitted by:
Will M.
on January 30, 2018
Most Helpful Answer
eric
from Lewiston, ID asked:
January 19, 2018
What is the minimum temperature this thermostat can be set at?
1 Answer
It is 50 degrees
Submitted by:
eFireplaceStore.com
on January 22, 2018
Most Helpful Answer
Peter
from Ontario, Canada asked:
January 14, 2018
I operate a Napoleon natural gas fireplace Model GI 3014 with a mechanical "wired" thermostat. Can I replace this thermostat with this wall-mounted digital thermostat ?
1 Answer
Yes, as this is a millivolt thermostat and thus is perfectly compatible with your fireplace model!
Submitted by:
eFireplaceStore.com
on January 15, 2018
Most Helpful Answer
David
from Winter Park, CO asked:
November 20, 2017
What is the temperature swing for this thermostat.
We updated our 17 year old Napoleon fireplace gas insert two years ago with a new Napoleon direct vent gas fireplace insert.
The old thermostat has about a 5 degree temperature swing. This is too much swing for my liking.
I'd prefer +/-1 degree.
1 Answer
I apologize for the delay in information. Per the manufacturer, the thermostat ranges from 45 to 90 degrees, and should have only a 3 degree temperature swing.
Submitted by:
Brennan W.
on December 14, 2017
Most Helpful Answer
Kamlesh
from CA asked:
November 17, 2017
I have a fireplace from Warnock Hersey in my living room, model BGD33-P/BCDV33-P and serial number 016551, manufactured by Wolf Steel LTD. My switch for the on and off setting performs poorly. Is this model suitable for my needs?
1 Answer
This will indeed work for your unit and there shouldn't be any issue with you installing it yourself.
Submitted by:
Brennan W.
on November 19, 2017
Most Helpful Answer
Samantha
from MO asked:
October 31, 2017
Can you change the thermostat from Fahrenheit to Celsius? If so, how do you do it? Thank you.
1 Answer
This thermostat can indeed be converted to Celsius by clipping the W904 jumper on the circuit board.
Submitted by:
Brennan W.
on October 31, 2017
Most Helpful Answer
John
from Pequot Lakes, MN asked:
August 18, 2017
I have a Napolean fireplace with a wired wall mount thermostat. Will it work if power to the house is lost? Thank you.
1 Answer
That would depend on the model of the fireplace. Most units will. The fans, in most cases, will not.
Submitted by:
Owen
on August 18, 2017
Most Helpful Answer
Nancy
from MI asked:
October 14, 2014
Will this thermostat modulate the flame height of my GD60 NG stove?
1 Answer
This thermostat will only offer on/off functionality as the temperature in the room varies. Flame height will still have to be modified at the valve beneath the stove.
Submitted by:
Chris C.
on October 14, 2014
Most Helpful Answer