Part Number: HRG45-24-NONEN
eFireplaceStore Item Number: PTS-HRG45-24-NONEN
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
You can bring all of the rustic charm of a quiet little cabin in the woods into your own home with a set of Real Fyre Rustic Oak Gas Logs by Peterson. Rustic Oak Gas Logs are made of the same high-quality materials and have the same steel reinforcement bars that all Peterson Real Fyre Gas Logs do. However, these gas logs mimic the 'farmhouse' look of a roaring fire and perfectly recreate the warmth and feel of an old country inn fireplace. The Real Fyre Rustic Oak Designer Gas Logs by Peterson blend the speed and convenience of modern life with the old-world, rustic charm of a simple evening in the country.
The Real Fyre G45 Triple T Burner is a specialized gas logs burner that is similar to most high end gas log burners but adds an extra "T" shaped front burner which accentuates front ember presentation and adds depth to the flame, while maximizing warmth. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace by having an additional small row of front flames and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.