Part Number: REDG45A-30N-SS-SPK-26
eFireplaceStore Item Number: PTS-REDG45A-30N-SS-SPK-26
Red oak is not only a beautiful wood, it is a way to add a unique and inviting element to your home thanks to the Real Fyre Red Oak Gas Logs by Peterson. Each Peterson gas log set is made from the finest materials in the industry and reinforced with steel rods. The attention to detail gives each set of Real Fyre logs the unique quality of accurately reproducing the look and feel of any wood, in this case red oak. This particular log set allows you to choose your desired look by giving you the option of facing the logs' split side or bark side towards the front of your fireplace. For versatility, function, and an unforgettable look you can do no better than Real Fyre Red Oak Gas Logs by Peterson.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set comes with a Manual Safety Pilot Kit. The manual safety pilot is the most basic safety pilot. It is a standing pilot light which stays lit indefinitely. To light the log set or to turn the flame up and down, you simply turn the knob on the pilot kit. This knob is located on the actual pilot kit which is attached to the burner system.