- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
Drolet Ultra-Quiet 130 Cfm Blower With Variable Speed Control - AC03095
Product Details
Part Number: AC03095 eFireplaceStore Item Number: SBI-AC03095 UPC: 773389040072 Features
This Drolet Ultra-Quiet 130 Cfm Blower with Variable Speed Control fits on Drolet Escape 1800 and Classic EPA model heating stoves. It's designed to help distribute the heated air produced by those stoves, making the heating process easier, faster, and more efficient. The blower itself operates extremely quietly and moves an impressive 130 cubic feet per minute of heated air. What's more, there are variable speeds, allowing you to get heat where you need it in short order and to maintain a comfortable temperature much more easily than you could without a blower. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
33 Questions &
33 Answers
Frank L.
from Dushore, PA asked:
March 25, 2023
What is the direction of the blower air? Does the blower send the air straight up from the rear?
1 Answer
The blower on this unit is designed to blow straight up the rear of the unit, inside of the heat shield. It will then continue through the shield and out on the top of the of the unit. It, unfortunately, is not designed to be mounted in the opposite direction.
Submitted by:
Cody S.
on March 27, 2023
Michael B.
from Groveland, CA asked:
December 13, 2022
Is it possible to get an installation instruction sheet for this blower before I order it?
1 Answer
The installation instructions for the blower would be in the manual for the woodstove that you own.
Submitted by:
Kathy O.
on December 14, 2022
Travis
from Toronto asked:
January 29, 2022
Will this blower fit a Drolet HT 2000?
1 Answer
No, this blower is only listed for the Drolet Escape 1800 and Drolet Classic EPA Model Stoves.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on January 31, 2022
Sharon
from Indianapolis, IN asked:
December 24, 2021
Will this blower fit a Drolet 1400 I fireplace insert?
1 Answer
That blower will not work. According to the manual, you would need part number 44089.
Submitted by:
Kathy O.
on December 24, 2021
Joe V
from Vienna, IL asked:
November 14, 2021
Will this fit an empire 3500 stove?Â
1 Answer
No, this blower is only suitable for use on select Drolet or Osburn wood stoves.Â
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 15, 2021
Jonathan G
from Nova Scotia asked:
November 1, 2021
Will this blower push the heat from the stove further into my home and make the stove more efficient?
1 Answer
Yes, the blower will help distribute the air further into the room.
Submitted by:
Aaron D.
on November 1, 2021
Mike
from Colorado asked:
October 9, 2021
Will this fit the Osburn Inspire 2000?
1 Answer
Yes, this blower is compatible with the Osburn Inspire 2000 Wood Stove.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 11, 2021
Anthony R
from CO asked:
September 30, 2021
What are the dimensions of this blower please?
1 Answer
Like all blowers we offer, measurements are not provided since blowers are tested and listed for the hearth systems we also offer and using an incompatible blower would void warranty terms for these systems.
Submitted by:
Will M.
on September 30, 2021
David C
from Texas asked:
February 17, 2021
Will the Drolet Ultra- Quiet blower fit the Drolet HT 3000?
1 Answer
No, the HT-3000 stove must use the AC02050 blower seen here.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on February 17, 2021
William
from Yorktown, VA asked:
December 25, 2020
What are the dimensions of this heater?
1 Answer
This is not a heater, it is a blower for a stove, and the manufacturer does not provide dimensions as it is only made for specific units.Â
Submitted by:
Brennan W.
on December 27, 2020
Deidra
from Jobstown, NJ asked:
December 1, 2020
Does this fit the Drolet 1800 stove?
1 Answer
Yes, this blower is compatible with the Drolet Escape 1800 stove.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on December 2, 2020
Mike
from Houston, TX asked:
November 23, 2020
Does this fan fit HT 3000 model?
1 Answer
No. The HT-3000 stove uses the AC02050 blower.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 24, 2020
Virginia
from Cleveland Hgts asked:
October 31, 2020
How long is the cord?
1 Answer
The cord is 8' long.Â
Submitted by:
Kelsey C.
on November 3, 2020
John
from Seattle asked:
September 28, 2020
Will this fit the Escape 2100?
1 Answer
No, this blower is not listed for use with the Escape 2100.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on September 29, 2020
Michael B.
from Milton, NY asked:
April 10, 2020
Do you have a blower for a Lopi/Travis Republic 1750 Wood stove?
1 Answer
We are not a Lopi dealer and we cannot provide parts or advise on options for your unit. We recommend contacting the manufacturer or calling a local dealer for more information. We apologize for the inconvenience.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on April 10, 2020
Ron D.
from Syracuse, NY asked:
March 25, 2020
Will this work/fit/replacement for Lopi endeavor wood stove?
1 Answer
No, that is only for a Drolet brand unit. Since we are Not a Lopi dealer, we would not have a fan for your stove. You would need to contact Lopi for a local dealer that would be able to assist you.
Submitted by:
Owen O.
on March 25, 2020
Russ
January 2, 2020
What is the Sones rating of this fan?
1 Answer
The manufacturer does not provide this information. You may contact SBI (the manufacturer of Drolet brand) at 418-878-3040 for more information, if available.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on January 2, 2020
Steve D.
from Franklin, NC asked:
December 5, 2019
Will this blower works on Drolet model #DB07200?
1 Answer
No, but we offer the correct blower for the HT2000 here.Â
Submitted by:
Will M.
on December 5, 2019
Weaver
from Northville, NY asked:
November 13, 2019
Will this blower fit a Lopi Sheffield woodstove?
1 Answer
We do not have any 120v blowers or any other optional accessories for Lopi products.Â
Submitted by:
Will M.
on November 13, 2019
C. Al
from Irma, WI asked:
October 27, 2019
Will this blower fit on a Drolet HT2000 wood stove?
1 Answer
The Drolet Ultra-Quiet 100 Cfm Blower With Variable Speed Control - AC02050 is the listed optional blower and no other 110v fan will work with this stove.Â
Submitted by:
Will M.
on October 29, 2019
Mario
from Canada asked:
September 28, 2019
Will this fit an Escape 2100?
1 Answer
Unfortunately, this blower would not fit an Escape 2100.
Submitted by:
Brennan W.
on September 30, 2019
julie
from big bear city, ca asked:
March 2, 2018
I have a SBI Flame Wood Stove Model XTD 1.1. Will this work with that stove ?
1 Answer
YES, that is the exact blower for the XTD 1.1
Submitted by:
Owen O.
on March 2, 2018
Ed
from San Francisco asked:
January 27, 2018
Will this kit fit a Pacific Energy Fusion D wood burning stove?
1 Answer
This blower is not listed for that stove. You will need to contact the manufacturer or a dealer for a #SSER.BLOW blower as we do not carry this product.
Submitted by:
eFireplaceStore.com
on January 29, 2018
Barbara C
from Bandon, OR asked:
January 6, 2018
Does this blower fit an Avalon 990 wood insert?
1 Answer
Unfortunately, we do not carry a blower that would fit an Avalon insert.
Submitted by:
Brennan W.
on January 8, 2018
Larry
from Philly asked:
December 28, 2017
What are the dimensions? How wired to house electricity? Thanks!
1 Answer
This blower is 17.5" wide x 6.5 " deep x 5" high. It connects to a 120 volt outlet.
Submitted by:
Brennan W.
on December 29, 2017
Mark J
from Hendersonville, NC asked:
December 7, 2017
Does this blower or any of your other blowers work with the Appalachian Stoves?
1 Answer
Unfortunately we do not have any blowers that would work for your stove. We apologize for any inconvenience.
Submitted by:
Brennan W.
on December 7, 2017
Marcella
from Dimondale, MI asked:
November 15, 2017
Will this model fit my solution 2.3 wood stove?
1 Answer
I checked the manufacturer's site and, no, this blower will not work for you. Instead, you'll want to use the AC01000.
Submitted by:
Kevin E.
on November 15, 2017
Jack
from WI asked:
July 28, 2017
Bath fans list the noise level in sones. Can you tell me the noise level of this model? The description, "ultra quiet," is subjective. I'd also like to know the dimensions to see if it will fit by fireplace.
1 Answer
The manufacturer does not list the volume in sones or a decibal rating and no dimensions are available. Like all blowers we offer, this blower is only safety tested and listed for use with hearth systems made by the same manufacturer.
Submitted by:
Will M.
on July 28, 2017
John
from Greenville, SC asked:
August 8, 2014
How many watts/amps does this product use?
1 Answer
Per the manufacturer, the fan requires 56 watts and .46 amps while operating. Start up of the fan requires closer to 1 amp.
Submitted by:
eFireplaceStore
on August 12, 2014
Simon
from Holden, MA asked:
April 23, 2014
The dimensions of this blower are 17.5" wide x 6.5 " deep x 5" high. Does this include the triangular piece on the top, if not is it removable? Is there a schematic drawing available?
1 Answer
Per the manufacturer, the 5 inch height is just the housing on its own. The mounting bracket add an additional 1 1/2 inches. It is riveted to the housing, but could be removed by drilling the rivets out.
Submitted by:
Collin C. - NFI Master Hearth Professional
on April 24, 2014
Neil
from NY asked:
August 13, 2013
Will this also fit a century fireplace insert?
1 Answer
No, this blower is only tested and listed for use with select Drolet wood stove models.
Submitted by:
Tyler M. - NFI Certified Specialist
on August 14, 2013
Mariann
from Minneapolis asked:
February 19, 2013
What is the dimension of this fan?
1 Answer
The manufacturer does not provide dimensions on this blower, as it has only been tested and listed for use with certain Drolet model stoves.
Submitted by:
Tyler M. - Fireplace Specialist
on February 19, 2013
Jeremy
from Clinton, IL asked:
October 14, 2012
What are the physical dimensions of this heater? Does it have a thermostatic control?
1 Answer
Per the manufacturer, physical dimensions of this blower are 6.5 inches deep, 5 inches tall, and 15 inches long. The blower is variable speed, but not thermostatically controlled.
Submitted by:
Collin C. - NFI Master Hearth Professional
on October 17, 2012
Customer Reviews
Review Summary
4.8
5 Reviews
5
80% (4)
4
20% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (5 of 5 responses)
By Lindsey from
Arcata, CA on January 13, 2023
I would recommend this item to a friend.
Should have bought this long ago
We replaced a 40+ year old wood stove two years ago with an EPA approved efficient stove. Our retailer thought it would heat well enough without the fan so we didn't get it then. About the same time we bought a fireplace insert with fan for our daughter's house. What a difference the fan makes. Spreads heat faster and wider than the stove alone (which has an enviro conduction fan).
Mostly easy installation.
Minor fit alignment for one mounting screw.
By Nels from
Arcadia on February 15, 2017
I would recommend this item to a friend.
Excellent service
Excellent servive
By Kathy from
Osseo, Wisconsin on January 13, 2012
I would recommend this item to a friend.
Drolet blower fits perfectly
My husband & I purchased a used wood-burning stove for our 4-season porch. Once we got it home, however, my husband was disappointed that the blower-unit that came with it was not the right fit for that model stove. Thanks to your help we found the correct blower and it fits perfectly. I ordered the Drolet Quick Connect Thermodisc too as a bonus and my husband loves it! We are both very pleased. Excellent service, availability, and delivery time. Thank you!
Fits our stove perfectly.
Our stove is in a long room and this fan moves the heat efficiently from one end of the room to the other.
Much quieter then the "wrong fit" fan that came with our used stove.
Easy to install.
The title is "ultra-quiet" which I would interpret as almost silent, however you can hear this fan. It is NOT LOUD by any means (and much quieter than many fans) but you CAN hear it. Fortunately, our stove is located AWAY our TV so it is more of a background noise and does not interfere with us hearing the TV.
By Gary from
Cincinnati, Oh on December 1, 2011
I would recommend this item to a friend.
Efficient, well made and saving money
I am using this with a Fisher fireplace insert and it has greatly improved circulation of heat throughout the house. My insert did not come with a blower and has a flange at the top of my insert that holds this blower in place without coming in direct contact with the wood stove insert. The blower unit at full speed is a little noisy but at 3/4 speed is hardly noticeable in the family room. Temperatures at the far end of the home have increased by 5 degrees on average compared to same outside temperatures last year.
- Saving money - have not had to turn on the electric heat pump this year!
- Quality of unit is above average and design is good.
- Variable speed control is built into unit.
- long 8 ft heavy duty electric cord
- It's a little noisy at high speed - for my application
- designed specifically for Drolet stoves - need a generic unit.
By Mark from
Flagstaff, AZ on November 29, 2011
I would recommend this item to a friend.
Throws a lot of hot air
The fan is fairly quiet at the lowest speed (I would not say ultra-quiet), and fairly noisy at top speed. It was easy to install however the supplied screws were too large (diameter) for the holes in my stove which is a Drolet Escape 1800. Overall it performs well and really throws a lot of heat as would be expected. I thought my stove would cool off more at the low speed setting, but the temperature stays the same and my house seems to heat up faster. I use the fan about 80% of the time now while running my stove.
Well-made
Moves a lot of air
Fitment wasn't perfect
