Superior/IHP 42 Inch Extruded Aluminum Bi-Fold Doors - Black

These are indeed compatible with your fireplace.

These doors will not work with any older Superior fireplace.

The part number of BDB42B is simply the part number associated with the brushed brass version of these doors. These doors are indeed the correct doors for your fireplace, in addition to the brass doors I have mentioned and the Superior/Vantage Hearth Bi-Fold Glass Doors with Platinum Finish - For 42 Inch Value Line Wood-Burning Fireplaces .

Those doors are model specific for a specific Superior Fireplace line.

No they are for a Superior. We do not carry doors for a Heatilator as we are not a dealer for them.

No glass doors were ever offered as this is a ventless firebox and glass doors are not compatible with ventless fireboxes and their corresponding ventless gas log sets.

These doors will not fit a Marco fireplace and, unfortunately, we will not offer any doors that will fit Marco fireplaces.

No, those are different brands which cannot cross over. Unfortunately, the doors for your model are no longer in production.

Unfortunately, neither this set nor any other set that we carry will be compatible with your unit. I apologize for any inconvenience.

Those are the correct doors for that unit.

No it will not.

Yes, they will.

The manufacturer does not provide the dimensions of the doors as they are made only for certain fireplaces.

Unfortunately, we do not have any doors that would fit your fireplace.

These doors are model specific and your model does not have a door set listed in its literature.

The tracks would need to be ordered separately.

No, these doors are not suitable for use with the BC42 model.

Unfortunately, I do not carry a door set that would be compatible with your unit. I apologize for any inconvenience.

These will indeed fit your unit.

These are indeed glass doors.

Unfortunately, this door set would not work for your fireplace, and we do not carry the correct doors. We apologize for any inconvenience.

These are indeed the listed doors for the Superior WRT/WCT2042.

These doors measure 21 3/8 inches in height.

This will not fit properly and no doors will be available for your Marco fireplace.

The correct doors to use will be the Superior/FMI 42 Inch Extruded Aluminum Bi-Fold Glass Doors - Black.

Yes, these BDB42 doors are compatible with a Superior WRT2042WS fireplace.

These particular doors are designed for specific pre-fabricated fireplaces manufactured by FMI or Superior. For a masonry fireplace, I would suggest our Textured Black Princeton Glass Enclosure. Please note, the drop down menus on the right hand side allow you to choose the overall door width and height. In the product description, you will find a chart to aid in selecting the correct sized doors for your fireplace.

These doors are designed for use with a certain line of FMI and Vantage Hearth fireplaces that have a 21 1/2 inch opening height. As such, the doors will be slightly smaller. Please keep in mind that the door width and location of the mounting pins are set up for these particular brands and will likely not offer a perfect fit to other manufacturers products.

While they are not a "sealed" door assembly, having the doors closed while the unit is not in use will indeed limit cold air drafts.

Unfortunately, I do not have a specification sheet for this particular item. The doors measure approximately 21 inches tall, by 42 inches wide, but will only fit certain models of DESA, FMI, and Vantage Hearth products.

Installation of the doors is relatively easy. The doors will have mounting pins that will allow you to tilt the doors into position and pop the pins into the pre-drilled holes on the upper and lower lips of the fireplace opening. You may need to loosen the mounting screws on the door rails to square up the assembly, but this is also fairly easy to do.

The doors will have an overall height of 21" and will have tabs on each corner to pop the assembly into the face of the fireplace.