Part Numbers: G46-18-20-11,, G46-18-20-11M
eFireplaceStore Item Number: PTS-G46-18-20-APK-11N
UPCs: 619655129631,, 619655147482
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Even the most attractive gas log set can't make up for a mediocre burner. That's why it's so important for you to pair your gas logs with a high-quality burner like this Peterson Real Fyre ANSI Certified Advanced Glowing Ember Gas Log Burner System. With this burner in your fireplace you can enjoy dynamic dancing flames, realistic glowing embers, and efficient radiant heat - all without the mess and hassles of a traditional wood fire. Installing an ANSI Certified Glowing Ember burner system is also stress-free since it comes with everything you need to connect it to your log set.
This is a vented gas log burner that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. Vented Gas Log sets, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log burner comes with a On/Off Remote Ready Pilot System. The on/off remote ready pilot system allows you to control your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control. The flame will always be the same height. The control valve and regulator is ANSI certified and is pre attached to the burner.
Remote Control Options For This Pilot Kit:
* This is a Natural Gas Log Burner. Please verify that you have the correct gas type.
This is a gas log burner only. You must purchase the gas logs to have a complete gas log set or you can purchase one of our complete gas log sets.
* The fireplace's Middle Width must be at least 23 Inches and the Depth must be at least 15 Inches for this gas log burner to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.