Part Number: RDPG45-18-NONEN
eFireplaceStore Item Number: PTS-RDPG45-18-NONEN
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
The Real Fyre Golden Oak Designer Plus Gas Logs by Peterson are one of the most popular models of Peterson Real Fyre gas logs because of their combination of beauty and function. The logs themselves are made of superior refractory ceramics, expanded shales, and aggregates reinforced by steel rods that provide maximum integrity and prevent breakage. The exterior of the gas logs feature handpainted details that create a uniquely realistic look. Adding to the realism are the holes in the top of the gas logs that allow flames to come through, completely mimicking the look of a natural fire. Real Fyre Golden Oak Designer Plus Gas Logs by Peterson provide the perfect mix of authentic fire-like appearance, rugged durability, and maximum performance for your home and fireplace.
The Real Fyre G45 Triple T Burner is a specialized gas logs burner that is similar to most high end gas log burners but adds an extra "T" shaped front burner which accentuates front ember presentation and adds depth to the flame, while maximizing warmth. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace by having an additional small row of front flames and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.