- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
US Stove 6 Inch Cast Iron Stove Damper
Product Details
Part Number: D6 eFireplaceStore Item Number: USS-D6 UPC: 00012685000060 Features
|
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
4 Questions &
4 Answers
Jim
from Elizabeth Lake, CA asked:
February 21, 2017
Does this fit into a 6" stove pipe requiring drilling for the damper to rotate?
1 Answer
You would indeed need to drill into the stove pipe to allow for the damper handle to rotate.
Submitted by:
Brennan W.
on February 22, 2017
Scott
from MI asked:
February 15, 2017
Where is this part made?
1 Answer
This part is made in China.
Submitted by:
Brennan W.
on February 15, 2017
Jason
from Buffalo, WY asked:
December 17, 2014
How far above the stove should the Damper be set?
1 Answer
Most manufacturers will specify the ideal height, but in the event that you are using an older stove that does not say, 12 inches is a good height. This will still allow it to function properly without you having to put your hand and arm too close to the hot stove top.
Submitted by:
eFireplaceStore
on December 17, 2014
Kristy
from Harriman asked:
November 27, 2012
How do you get the pin out? And install?
1 Answer
The damper pin will have a small bend nearer the handle, which will hold the pin securely within the cast iron plate. In order to free the pin, you must push the handle in and compress the spring fully. This will force the bend in the pin out of the retaining sleeve on the plate. You can then rotate the pin and pull it out of the plate.
It will be necessary to hold the plate while performing this procedure so that it does not bend the stovepipe or fall into the stove when the pin is removed.
Submitted by:
Collin C. - NFI Master Hearth Professional
on November 28, 2012
Customer Reviews
