This wall heater might be your perfect heating solution. It can be easily installed on an outside wall and can be recessed between the wall studs. It will generate up to 55,000 BTU with an AFUE of 76%. The unit includes a 24V electric thermostat and a counterflow blower for efficiency. It uses a reliable standing pilot and has an automatic safety shut-off for safety. The front panels remove for cleaning and servicing. Both natural gas and propane models are available. The combustion chamber has 10-year warranty and there is a 1-year limited warranty on the parts. The dimensions of the unit are 82 -3/8" H x 16" W x 11-5/16" D. The required clearances are 4" from the top, 4" from the sides without register, 0" from bottom of unit to the floor.
Features
Generates up to 55,000 BTUs
76% A.F.U.E
Easily installs on outside walls
Can be recessed between wall studs
Includes 24-volt electric thermostat and counterflow blower
Reliable standing pilot
Automatic safety shut-off keeps you safe
Removable front panels allow convenient cleaning and servicing
Natural gas and propane models available
10-year warranty for combustion chamber and 1-year limited warranty for
parts
Dimensions: 82 3/8" H x 16" W x 11 5/16" D
Minimum Clearances:
Top - 4"
Sides - 4" without register
From bottom of unit to floor - none
Manufacturer: Empire Part Number: DV55SPPNAT UPC: 720968086013
By Austin Myers from Moodus, Connecticut. on January 22, 2012
Have this model for about last 10 years. When thermo calls for heat, burners go on but fan does not come for blower. Have shut stove down for now. What could be causing this problem?
By Kevin E. - Fireplace Specialist on January 23, 2012
Answer:
This concern could either be caused by a malfunctioning fan control switch or a defective blower assembly. Of course, it could also be blamed on an electrical issue anywhere in the furnace's electrical harness. To know for sure, a technician should be called out to check the unit.