Free shipping
Low Price
View Cart

    DuraTech All-Fuel Aluminum Roof Flashing - For Chimney Pipes with a 6-Inch Inner Diameter - 6DT-F6

    List Price: $99.99
    Sale Price: $82.41
    You Save: $17.58 (18%)
    In Stock.
    * Usually Ships Same Business Day.
    See complete product details >>
    Product Details
    Free Venting Design & Quote:
    Manufacturer: DuraVent
    Part Number: 6DT-F6
    eFireplaceStore Item Number: CPF-70682
    UPC: 662492292808


    • Protects chimney pipes vented through roof*
    • Durable aluminum construction
    • For use with 6" DuraTech chimney pipes
    • Suitable for roofs with pitches between 1/12 and 6/12
    • 8" height
    • Limited

    *Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.

    * Please Note: A separately purchased Storm Collar is required for installation.

    The time has come for your to install a chimney in your home, and you are looking around for the resources to make sure that the process is not only smooth but also one that results in your chimney being properly installed. The DuraTech All-Fuel Aluminum Roof Flashing is an item that should be given due consideration prior to being put into your fireplace. Designed to be used in conjunction with chimney pipes that have a 6 inch inner diameter, all you need is to buy a storm collar and you will be ready to go.
    Customer Questions & Answers
    2 Questions & 2 Answers
    from Oklahoma City, OK asked:
    July 24, 2015
    Is the aluminum of this DuraTech All-Fuel Aluminum Roof Flashing safe as far as reacting with stainless steel stove pipes?
    1 Answer
    The cone portion of this flashing only slightly makes contact with the outer 8" diameter galvalume shell of the 6" DuraTech chimney this is made for and would subsequently not reach anywhere near a hazardous temperature when installed properly.
    Will M.
    on July 24, 2015

    from Pittsburgh, PA asked:
    June 14, 2015
    Could this DuraTech All-Fuel aluminum roof flashing vent a wood burning stove through a combustible wall with the 90 degree adapter inside angling the stove pipe?
    1 Answer
    This flashing is only manufactured to vent Class A chimney through a roof. However, a component such as the DuraTech All-Fuel Chimney Pipe Wall Thimble could be used. You must convert from single or double walled stovepipe to a listed Class A chimney system before passing the pipe through the wall.
    on June 14, 2015

    Customer Reviews
    2 Reviews
    100% (2)
    0% (0)
    0% (0)
    0% (0)
    0% (0)
    100% Recommend this product (2 of 2 responses)
    By Scott from NV on August 28, 2017
    I would recommend this item to a friend.
    Good Product
    This was just what I needed to flash my stove pipe and at a good price!
    ProsI got it quickly after I ordered it.
    By ivo from glenview on January 19, 2016
    I would recommend this item to a friend.
    Good product quality materials
    Nice and large, covers a good 2 square foot area to prevent leaks or hot temperature exposure to your shingles!
    ProsNice and large, covers a big area

    Let Our Experts Design
    Your Venting System


    Find the Right Gas Logs
    For Your Fireplace

    Sign-up for our Email!
    Enter your email for new arrivals and special offers.