- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - Heaters
- Fireplace Mantels
- Fireplace Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHeatersFireplace MantelsFireplace AccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
Elite Adjustable 6 Inch Deep Surface Mount Fireplace Hood
- Three piece telescoping adjustable design
- Can be used with vent-free gas logs
- Several attractive finishes to choose from
- Attaches to fireplace facing using concealed screws
- Measures 6 inches deep by 28 to 48 inches in width
Product Details
Part Numbers: EUCH6S-AB,, EUCH6S-MB,, EUCH6S-PB,, EUCH6S-PC,, EUCH6S-SC eFireplaceStore Item Number: FSD-EUCH6S Features
*Please Note: This item is custom made by the manufacturer and can not be cancelled or returned once the order is placed unless the item is defective or damaged in transit. This quality Fireplace Hood by Elite protects your mantel and surround by insulating them against the heat generated by fires, and can also be used with vent-free gas logs. This adjustable 6 in. fireplace hood comes with surface mount to ensure the safety and longevity of your mantel or hearth surround, and comes in nine colorful and attractive finishes: antique brass, polished brass, polished chrome, satin chrome, matte black, and satin brass. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
10 Questions &
10 Answers
Jennifer A
from FL asked:
November 4, 2020
Does this product come with screws?
1 Answer
There are self-tapping screws included with this hood.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on November 4, 2020
Angelo O
from Round Lake, NY asked:
September 30, 2020
Does this product come with the necessary accessories to mount directly to stone? If not, can you recommend what else may be needed?
1 Answer
This is a surface mount hood, so you could anchor it to the stone, but you would need to provide your own masonry anchors, as these would not be included with the hood.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on September 30, 2020
Jordan
May 29, 2020
Can this go on a propane, gas fireplace stove?
1 Answer
This can be installed above the opening of a gas fireplace, yes.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on June 1, 2020
Ann C.
from Stamford, CT asked:
March 31, 2020
I am worried about our TV becoming too hot. The bottom of 65-inch tv hangs 10 inches from the top of the fireplace. The bottom of tv protrudes 6 inches from the fireplace wall; top protrudes 18 inches from the wall. The fireplace opening is 45" wide, 32" deep, 34" tall. Would a hood work to protect our TV?
1 Answer
Our best recommendation would be a 6-inch projection, surface mount hood (such as this item), but that would need to anchor into the stone you have on the wall. While we cannot guarantee this will prevent any heat damage, it is the best option we can offer out of what we sell.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on April 1, 2020
Arthur B.
from Yorktown, VA asked:
November 30, 2019
I have a 38 inches wide insert with doors. Wil this mount to the insert?
1 Answer
A surface mount hood should be mounted to the surface above the insert, not to the insert itself.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on December 2, 2019
Ron S.
from Kirtland, OH asked:
November 8, 2019
Can this be mounted to the tile mounted around the fireplace and above the glass doors on the fireplace?
1 Answer
An enclosure hood may be installed with screws via a flange that would hook over the backside of a door enclosure like the Princeton we offer. It is not meant for recessed doors where a surface mount hood should be used. For a 10" projecting mantel installed above a fireplace opening, a 6" projecting hood would be recommended, however, the mantel clearances outlined in the product literature for any manufactured gas fireplace or log set should always be followed.
Submitted by:
Will M.
on November 8, 2019
Linda Durham
from Adamsville, TN asked:
January 1, 2017
Are mounting brackets included with this fireplace hood?
1 Answer
Mounting brackets are not included with this hood because it is a surface mount, and is mounted with self-tapping screws which are included.
Submitted by:
Sarah
on January 2, 2017
Marlene
from Raleigh, NC asked:
July 7, 2016
Can I add some heat resistant material to the underside to give additional heat barrier?
1 Answer
The manufacturer of these hoods, Elite, advised that a heat resistant material can indeed be added to the hood for additional heat protection.
Submitted by:
Chris C.
on July 7, 2016
Don
from Henderson, NV asked:
August 1, 2014
What is the height/side dimension?
1 Answer
Per the manufacturer, the hood is adjustable from 28" to 48" wide and comes out 6" from the face of the fireplace on a surface mount. The piece of the hood that sets flush against the fireplace is 3 3/4" tall.
Submitted by:
Chris C.
on August 4, 2014
Gene
from Jonesboro, LA asked:
January 9, 2014
What is the difference in a lintel mount and a flush mount?
1 Answer
Lintel mount hoods have a flat piece of metal that extends rearward into the fireplace opening and allows the hood to be mounted against the lintel, flush with the fireplace opening. As such, lintel mount and flush mount are often interchangeably used terms.
Submitted by:
Collin C. - NFI Master Hearth Professional
on January 9, 2014
Customer Reviews
4.4
21 Reviews
5
71% (15)
4
14% (3)
3
5% (1)
2
5% (1)
1
5% (1)
81% Recommend this product (17 of 21 responses)
By Judy from
Mt. Airy, MD on December 11, 2019
I would recommend this item to a friend.
Love it!
Love my fireplace hood. Easy to install and keeps the heat off my mantle. Also distributes the heat out into the room more.
ProsEasy to install. Works great.
ConsNone
By Paula from
Morton, IL on January 9, 2019
I would recommend this item to a friend.
Perfect fit !
I looked at several different types of fireplace heat hoods before deciding on this one. It's made well and does help protect my wood mantel from excess heat. I just had a non- vented gas log installed in my wood burning fireplace, so I can heat my living room without any electricity, if power goes out.
By Larry from
Nebraska on November 6, 2018
I would recommend this item to a friend.
Love it.
Love it; best thing ever.
ProsLove it
By E G. from
Manchester, CT on October 10, 2018
I would recommend this item to a friend.
Quality Product
FYI, I recently purchased a hood for my fireplace...It is of high quality (except for rough edges on center section- which I filed off). It was a good thing the 3 sections were wrapped in plastic as it prevented the scratches from marking the metal....except for rough edges I would rate it 5 stars.
By SHAH from
toronto canada on January 25, 2018
I would recommend this item to a friend.
FIREPLACE HOOD
BLOCKS 60% OF THE HEAT.
TOO EXPENSIVE FOR WHAT THE ITEM ACTUALLY IS.
SERVICE IS V.GOOD
TOO EXPENSIVE FOR WHAT THE ITEM ACTUALLY IS.
SERVICE IS V.GOOD
Pros60% GOOD
Cons$40% NOT GOOD.
TOO EXPENSIVE.CAN NOT BE RETURNED.
By Nancy from
Hudson on January 6, 2017
Does not reflect heat
Purchased this to reflect heat from mantel. This product did not help reflect any of the heat. Disappointed!
By Gina from
Indianapolis on December 8, 2016
I would recommend this item to a friend.
Excellent Purchase
This fireplace hood was easy to install and works great. Have vent free fireplace and heat was rising making mantel very hot. This hood has stopped the heat from rising. So happy with this purchase. Highly recommend.
By Weaver from
JONESBORO on August 29, 2016
Construction
Very poor construction. The sections would not stay together.... Not worth the price paid.
By Tim from
GALLATIN on November 7, 2015
I would recommend this item to a friend.
fireplace hood
well build easy to install
Prosdoes what it was made for works great
Consnone
By BK from
Murritera, CA on February 5, 2015
I would recommend this item to a friend.
Fire Place Deflector
This is exactly what we needed to deflect the heat from our TV.
ProsVery easy to install. The finish blends right in with the present fire place coating.
ConsBased on the material it should cost less.
By Steffon from
Albany, GA on December 10, 2014
I would recommend this item to a friend.
Beautiful hood
Fast ship time, we love the fire vent hood its beautiful and I will buy again from this company. Great to do business with.
By Arlis from
Somerset, KY on December 2, 2014
I would recommend this item to a friend.
Only place that had this item
This part worked just like I wanted it to , it kept me from tearing my mantle down from my fireplace. Six inches is what i needed to take the heat out. This is the only place that had what i wanted.
By Janetta from
Southbury, CT on December 2, 2014
I would recommend this item to a friend.
Love this hood!
I'm pleased with my new fireplace hood. It was easy to install and works very well.
By Aaron from
East Peoria, IL on April 2, 2014
I would recommend this item to a friend.
Adjustable 6" Bright Brass Hood
Hood was packaged well and arrived in good condition. adjustable to about any length fireplace door. Diverted the heat out and away from my 46" LCD and the sound bar beneath.It did have a gap cutout in the back of the hood that I had to fill in because of the mounting surface but on a flat, solid surface, would not be an issue.Caution!...Handle carefully as the edges are rather sharp. My fingers found out when trying to adjust the length!Price seemed high for what it is but this company was the least expensive I could find for this size and style.
ProsAdjustable
Nice finish
ConsSharp edges
cost
By Nancy from
Greenville, SC on February 20, 2014
I would recommend this item to a friend.
Modern Look
Updating a 1940's home and have put ventless gas logs in an old coal burning fireplace. This hood not only kept the mantle cool, but added a morecurrent and elegant look to my living room.
ProsRedirects the heat & is beautiful in the brushed nickel.
ConsNone, but could use larger screws for security reasons.
By John M. from
DeValls Bluff, Arkansas on January 4, 2014
I would recommend this item to a friend.
Worked on Our Fireplace Great.
Does a great job. Made to fit on flat metal face on fireplace. I adjusted for my brick by drilling in mortar anchors and screws. Works great.
By Eugene F. from
Gastonia,NC on December 30, 2013
I would recommend this item to a friend.
Elite Adjustable 6 Inch Fireplace Hood with Surface Mount
The installation process had a few hitches. The self threading screws were too long. As a result, we could not tighten the hood/ With other screws, we could properly tighten the hood. .The hood is attractive and functional.
By Sue from
Terra Alta, WV on October 25, 2013
Stylish Fireplace Hood
Fast shipping....excellent product.
Prosavailable in a variety of colors and finishes......super easy to install....deflects a lot of heat.
Consnone
By Wayne I. from
Indianapolis on April 23, 2013
I would recommend this item to a friend.
Looks Great and Does What it is Suppose to Do.
I have a gas log fireplace. This unit really does help deflect the heat away from the wall. Without the unit, the underside of my mantle was 140F. With the unit installed the mantle temperature was 82F, and 72F on top of the mantle. As a plus, it actually looks very nice on the fireplace. Also had reasonably quick delivery.I found it pretty expensive for a basic piece of brass sheet metal, but based on my searches this is actually the best price I could find.
ProsReflects heat well, and looks nice.
ConsShould be about half the price, but other dealers are even more expensive.
By Bob from
North Carolina on May 30, 2012
I would recommend this item to a friend.
Elite adjustable 6 inch fireplace hood
Arrived faster than expected. very good quality and a breeze to install. Plus it does the job of deflecting heat away from art work above the fireplace.
ProsSee everything above, plus it's made right here in good ole USA!
ConsNothing
By Marilyn B. from
on January 25, 2011
Review for
Hood arrived in very good condition. It was lighter in weight than expected. Masonry screws were not included, had to go out and purchase them. Looks very nice.
