Part Number: CHDG45-24N-SS-NONE
eFireplaceStore Item Number: PTS-CHDG45-24N-SS-NONE
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Gas logs designed to look like a real wood-burning fire are what Real Fyre Charred Oak Gas Logs by Peterson are all about. The realistic, partially burnt exterior gives you the impression of an actual fire burning away in your fireplace. To add to the authenticity, the bottom log is 'burnt through' and allows you and your family to look inside the fire to see the flames and embers within. These gas logs not only look great, they are built to last thanks to the high-quality materials used in construction and the steel reinforcement rods. Peterson is the most trusted gas log manufacturer around for a reason. Take advantage of their skill and know-how, get a realistic look, and get the right value for your money with a set of Real Fyre Charred Oak Gas Logs by Peterson.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.