By anthony kissel from mansfield ohio on November 7, 2011
I have an older wood stove that's has an od of 7 3/8". I think it was made to have 7" stove pipe ran from it but now there is only 6 and 8 inch pipe available. I'm planing on running 8" pipe but I need a connector. Any advise would be greatly appreciated.
By Tyler M. - Fireplace Specialist on November 8, 2011
Answer:Though it does not currently appear on our website, we do now offer the 7" DuraBlack stovepipe, so we would be able to get you the appliance adaptor, the pipe and the appropriate transition pieces to class A chimney pipe. Since the items are not on our website, however, you would need to give us a call at 1-800-203-1642 to discuss a potential order and get pricing.
By Calvin Wood from baton rouge LA on December 17, 2011
i have 2, 8" stove pipes that meet evenly (ie, they don't slip into each other). Will this work?
By Collin C. - NFI Master Hearth Professional on December 19, 2011
Answer:This component is actually meant to begin a stovepipe installation from the top of the stove itself and would not work for your needs. It will be necessary to reverse the direction of your venting system, crimp the end of one pipe to slide inside the other, or have a custom coupling made for your needs. None of the manufacturers we carry offer a male to male or female to female coupling.
By Ron Meadows from Remington< Va on October 7, 2016
I need this item in 6 inches? Is that available?
By Brennan W. on October 7, 2016
It is indeed available in 6" and can be found by clicking here
By Brick Linder from Pennsylvania on November 12, 2012
Could you provide the diameter dimensions? I have a Fisher stove with a top flue collar ID=7.75" and OD=8". I want to connect standard 8" single wall stove pipe.
By Collin C. - NFI Master Hearth Professional on November 13, 2012
Answer:Dimensions of this collar are 7 5/8 inches I.D. and 8 1/8" O.D. Based on the dimensions you provided, there should be no issue with connecting this adapter and using 8-inch Durablack stovepipe with your stove.
By Lucas from Belleville, Ontario, CAN on October 15, 2015
What the inside dimensions are on each end of this Dura-Black steel double-skirted stovepipe to appliance adaptor?
By eFireplaceStore on October 16, 2015
Answer:The male end of the adapter tapers to 7 5/8 inches, while the female end measures 8 1/8 inches.