By Karen Cerini from Scotch Plains, NJ on October 23, 2012
What are the dimensions of this panel?
By Tyler M. - Fireplace Specialist on October 23, 2012
Answer:The manufacturer does not provide dimensions for these panels, as they are only meant for use only with select 42" Empire Breckenridge vent-free fireboxes. As such, they are only tested and listed for use within these models.
By Bryan from Columbus, ID on October 29, 2014
Are these panels cut to fit the Empire 42" firebox or do they need to be cut to size?
By eFireplaceStore on October 29, 2014
Answer:These panels are designed to fit the 42 inch Empire Breckenridge Deluxe series with no modification. Retaining brackets will be provided with the panels to complete installation.
By Roger Kochan from Cleveland, Ohio on January 14, 2012
Can your firebox liners be used to line a Heatilator metal firebox? It is 36 w x 24 h.
By Collin C. - NFI Master Hearth Professional on January 16, 2012
Answer:Ceramic liners, such as this model, are manufactured specifically for use with the particular fireplace line that is listed.
That being the case, they can generally not be used with other models. The ceramic liners are not able to be modified by cutting, as they tend to crumble and deteriorate rapidly.
By Travis from Rohnert Park, Ca on January 7, 2013
I need a Fireboox liner for a Temco TEC36-5 wood burning fireplace insert. Its dimensions are 2 sides: 18 1/2 in X 19 1/2 in. Back panel: 22 1/2 in. X 19 1/2 in. I like the staked limestone - is there something in my size?
Can you help me?
By Tyler M. - Fireplace Specialist on January 7, 2013
Unfortunately, we do not have the manufacturer-specific panel that you are looking for, but we do offer some universal refractory panels that will work for your woodburning fireplace. Please see the following links:
One 24"h x 28"w Panel
Two 24" h x 40"w Panels
These panels are about 3/4" thick and can be cut down to the size you need with a masonry blade or tile saw. They are suitable for use as side, rear and floor panels inside any manufactured woodburning fireplace.
By Kim from Hecla, SD on November 2, 2016
I am wondering if I could use these panels to put on my walls around my wood stove. We had it installed professionally, but the wood still gets very hot. If so, is it possible to get them cut to a certain size.