Part Number: CDRG45-2-24-NONEN
eFireplaceStore Item Number: PTS-CDRG45-2-24-NONEN
A beach party might break out right in your living room once you add Real Fyre Coastal Driftwood Gas Logs by Peterson to your fireplace or hearth. Coastal Driftwood gas logs are designed to look like they have been smoothed and twisted by tumbling around in the ocean, just like real driftwood. Better than driftwood, though, is the fact that these logs are not made of tumbled wood but of high-quality industrial materials strengthened with steel reinforcement rods the Peterson way. The end result is a set of gas logs that looks like you found it on the beach but performs like a product of one of the world's leading gas log manufacturers. Don't limit the beach fire to once in a blue moon - have it any time you like at home with a set of Real Fyre Coastal Driftwood Gas Logs by Peterson.
The Real Fyre See Thru G45 Triple T Burner is an advanced system that creates dancing flames, maximum glowing effects and provides radiant heat into the room. See thru gas logs will have a special burner that causes the flame to come from the front, back, and middle of the logs. The logs and grate are also the same width in both front and back. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.