Part Number: RG45-24N-SS-NONE
eFireplaceStore Item Number: PTS-RG45-24N-SS-NONE
The Real Fyre Golden Oak Gas Logs by Peterson are one of the most popular models of Peterson Real Fyre gas logs because of their combination of beauty and function. The logs themselves are made of superior refractory ceramics, expanded shales, and aggregates reinforced by steel rods that provide maximum integrity and prevent breakage. The exterior of the gas logs accurately reproduce the look and texture of real wood to create a uniquely realistic look. Adding to the realism are the holes in the top of the gas logs that allow flames to come through, completely mimicing the look of a natural fire. Real Fyre Golden Oak Gas Logs by Peterson provide the perfect mix of authentic fire-like appearance, rugged durability, and maximum performance for your home and fireplace.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.