Part Number: WG45-24-NONEN
eFireplaceStore Item Number: PTS-WG45-24-NONEN
Every bit of the unmistakable brightness and warmth of white birch is captured in Real Fyre White Birch Gas Logs by Peterson. The beautiful, papery-white bark and dark accents are handpainted right on the gas logs' surface to create an extraordinarily realistic look. The inside is made of high-quality refractory ceramics and steel reinforcement rods to make sure these gas logs last you a lifetime. White birch is a unique look that Peterson is proud to offer as part of its amazing Real Fyre gas log line. If you're looking to add a quality set of gas logs to your fireplace and want to make sure it's something really special, try something new with the Real Fyre White Birch Gas Logs by Peterson.
The Real Fyre G45 Triple T Burner is a specialized gas logs burner that is similar to most high end gas log burners but adds an extra "T" shaped front burner which accentuates front ember presentation and adds depth to the flame, while maximizing warmth. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace by having an additional small row of front flames and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.