Monessen 30" Mountain Oak Ventless Propane Gas Log Set with Safety Pilot Kit

While we do not offer a list of all of the gas logs that will offer remote compatibility, you may visit our ventless gas logs section and use the filters on the left side of the page under "pilot type" to choose sets that may be used with a remote. A description of each pilot type is below: No Pilot – Match light – (Vented Only) This will not feature a valve and will only be available with vented natural gas log sets. This option is not available with any ventless log set or any propane set. The burner will be lit with a match and the gas flow/flame height will be controlled with a previously installed manual ball or gas valve in the fireplace. Typically, this valve is located outside of the fireplace opening on the floor or wall. Safety Pilot – (Vented & Vent Free) This is the most basic safety valve available for vented propane log sets but is also available with vented natural gas log sets. The pilot is lit manually using either a match or long stem butane lighter via the valve control knob. After a few seconds, the pilot flame contact with the thermocouple will allow gas flow to the main burner. If the pilot flame is extinguished for any reason, gas flow to the main burner will cease, preventing the open flow of gas into your home (this will be the case with any pilot kit, with the exception of the natural gas match lit option). On/Off Remote Pilot – (Vented & Vent Free) This pilot kit will feature a standing pilot that will have to be lit manually. The optional wall switch, On/Off or On/Off thermostatic remote will ignite the burner only. The flame height may be adjusted manually with the valve control knob, but not with the optional remote. Variable Flame Remote Pilot – (Vented & Vent Free) With vented log sets, this pilot kit will feature a standing pilot that will have to be lit manually. The optional Variable Wall Switch will turn on the flame and adjust the height up and down. The optional Basic Variable Remote will turn the unit on and off as well as adjust the flame height up and down, while the Deluxe Variable Remote will add thermostatic control. With ventless log sets, your results may show both standing and non-standing pilot kits. Either option will include a remote, but only the “Variable Flame Intermittent Pilot” option will feature a non-standing pilot flame that may be lit with the remote. You will be able to select either option on the left-hand side of the page in your filtered results. Electronic Remote Pilot – (Vented & Vent Free) This control type will include a remote and have a non-standing pilot that will ignite when activated by the remote, allowing gas flow to the main burner. With vented sets, the flame height will be fixed. With ventless sets, the remote will also allow you to adjust flame height.