Part Number: CHCRG45A-30P-SS-SPK-26
eFireplaceStore Item Number: PTS-CHCRG45A-30P-SS-SPK-26
American cedar is about as beautiful as it gets - a fact that is perfectly reflected in this handsome Real Fyre Charred Cedar Gas Logs by Peterson. The gas logs are handpainted to really give homeowners the unmistakable look and feel of burning cedar logs. These logs, however, are even stronger than cedar thanks to the high-quality materials used in their construction and the reinforced steel rods in each gas log's interior. With the logs' partially charred exterior and burnt-through bottom log that gives you a view of the flame and embers, you'll think you're burning a woodshed full of cedar - only without slogging through swamps for a week to round it all up. Bringing the beauty and elegance of cedar into your home is a snap using Real Fyre Charred Cedar Gas Logs by Peterson.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set comes with a Manual Safety Pilot Kit. The manual safety pilot is the most basic safety pilot. It is a standing pilot light which stays lit indefinitely. To light the log set or to turn the flame up and down, you simply turn the knob on the pilot kit. This knob is located on the actual pilot kit which is attached to the burner system.