Part Number: G45-16-19N
eFireplaceStore Item Number: PTS-G45-16-19N
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
If you want to do something a little bit different with your gas log set, then consider this Peterson Real Fyre Triple T Gas Log Burner System. It produces the same realistic flames and natural look you would expect from any Peterson burner, but with a unique improvement. The Triple T features a T-shaped burner that emphasizes its front embers, giving them an even greater dramatic effect, and adds depth to its flames. This unique design also maximizes the warmth you get from your gas logs by bringing the flames closer to your fireplace opening.
This is a vented gas log burner that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. Vented Gas Log sets, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log burner is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.
* This is a Natural Gas Log Burner. Please verify that you have the correct gas type.
This is a gas log burner only. You must purchase the gas logs and, if desired, pilot kit separately to have a complete gas log set or you can purchase one of our complete gas log sets.
* The fireplace's Middle Width must be at least 24 Inches and the Depth must be at least 11 Inches for this gas log burner to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.