By Richard c. Smith from Fuquay-Varina, NC on January 9, 2017
Can this High Wind Horizontal vent cap be used for my Vermont casting Direct vent gas stove (OXDV30NVSB)? It is vented horizontally.
By Will M. on January 10, 2017
Answer:If you are simply replacing the horizontal cap, we will need clarity as this model could have been vented with either Vermont Castings/Majestic 7TDV twist-lock venting which had a 4" inner and 7" outer diameter or Simpson Duravent DirectVent Pro (product in question) which has a 4" inner and 6 5/8" outer diameter and the two are not interchangeable. If you do indeed have 46DVA-HC standard high wind cap in question, there will indeed be an upgraded cap available. Please confirm and we will forward pricing for this cap.
By Devin from Denver, CO on September 1, 2014
I'm actually looking for this product but for a standard 4 inch Duravent B vent. What would you suggest?
By eFireplaceStore on September 2, 2014
Answer:Unfortunately, DuraVent does not offer a horizontal termination cap for their B vent product line. Traditionally, B vent is only designed to terminate vertically. I have come across a handful of appliances and heaters that require the use of B vent pipe and are also designed to be terminated horizontally. However, it seems the manufacturers of these appliances and the manufacturers of venting components are not on the same page. In past instances, customer's I have worked with ended up having to modify a vertical termination or have something custom made from another cap.
By Vic from Bigfork, MT on April 5, 2013
Will this rain cap work with a Central Fireplace Freestanding Model C42 B-Vent? If not, what do you recommend? I need a horizontally mounted exhaust vent.
By Tyler M. - NFI Certified Specialist on April 5, 2013
No, this cap is only meant for use with direct vent gas fireplaces and stoves; it is not suitable for use with a B-Vent model. B-Vent models have to be terminated vertically over the roof, so if your unit is a B-Vent, you cannot terminate the vent system horizontally. You will need the appropriately-sized Type B vent pipe to run from the unit to at least a couple of feet above the roof (perhaps more, depending on your roof pitch). You can see our full selection of Type B gas vent pipe below:
Type B Vent Pipe
By Brent from New York on January 31, 2017
Can I use this product with a Williams 1403622 direct-vent, natural gas furnace?
By Will M. on January 31, 2017
Answer:While we are not a Williams dealer, your model should have arrived with all of the venting components needed for installation. Unfortunately, this cap would not work.
By Gene from Steamboat, CO on October 10, 2013
Will this cap work with 4 inch inner/ 7 inch outer direct vent flex pipe?
By Collin C. - NFI Master Hearth Professional on October 10, 2013
Answer:Because this cap has twist lock ends, rather than tapered ends that a flex termination uses, I do not recommend using it with a flexible liner. If you know the brand of the flexible liner being used, I can suggest the proper cap for it.
By Andrew from Kitchener, Ontario, CAN on April 13, 2015
Is this Dura-Vent high-wind vent rain cap compatible with the Vermont Castings Stardance Direct Vent Model SDV30 Gas Wood Stove by Majestic Products Company?
By Brennan W. on April 13, 2015
Answer:According to the manufacturer, this cap should indeed work for your installation.
By Ben from Kansas City, KS on April 6, 2017
Will this product be a direct replacement for a Majestic DVP-TRAP1 Termination Cap? Measuring the inner and outer tubes, the inner tube is 4" and the outer tube is close to 6 1/2 to 6 5/8, so I think this one will work, but would love confirmation before purchase.
By Will M. on April 7, 2017
Answer:This is a Simpson DuraVent product that is not compatible with the Majestic-specific DVP venting.
By Ron from Flagstaff, AZ on February 16, 2016
Can this Dura-Vent rain cap be used on a pellet stove?
By Will M. on February 17, 2016
DirectVent pro is only approved for certain direct vent gas or propane stoves, heaters and fireplaces and would not be allowed with a pellet stove. For a similar product that can be used with pellet stoves, the Selkirk Direct-Temp Direct Vent Horizontal High-Wind Termination Cap
may be used, but please refer to the product literature for your pellet stove to confirm compatibility.
By Bert from Casper, WY on February 6, 2014
Is this recommended for the Napoleon WHD31 gas fireplace?
By Collin C. - NFI Master Hearth Professional on February 6, 2014