Part Number: WOG45-24N-SS-NONE
eFireplaceStore Item Number: PTS-WOG45-24N-SS-NONE
Leaving a distinctive impression is the name of the game with Real Fyre Woodland Oak Gas Logs by Peterson. These gas logs give that impression thanks to the visually arresting combination of realistic oak bark detail and equally realistic natural oak wood detail where the logs appear to have been chipped. Many gas logs look realistic, but not many offer such a sharp, striking style that sets them apart from the competition. And speaking of separation from the competition, Woodland Oak gas logs feature the superior materials, construction, and steel rod reinforcement used in all Peterson Real Fyre gas logs. Say goodbye to the ho-hum and hello to the best gas log set on the block by placing Real Fyre Woodland Oak Gas Logs by Peterson in your fireplace or hearth today.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.