HomeSaver 5 Inch Round WindBeater Stainless Steel Chimney Cap

5 Inch Stainless Steel WindBeater Chimney Cap
Heavy-duty 24-gauge, 304-alloy stainless steel construction
Economical alternative to prevent downdrafts
For relining pipe and sealed-end, factory-built chimneys
*Will not cure non-wind related draft problems
**When using WindBeater on a fireplace flue - the WindBeater size you use must have a cross-sectional area appropriate for the fireplace
Manufacturers lifetime warranty
Size: 5" round inside flue
Cross-Sectional Area: 19.6 sq. in.

See complete product details >>

Product Details

Manufacturer: HomeSaver
Part Number: 14905
eFireplaceStore Item Number: CPF-14905

Features

5 Inch Stainless Steel WindBeater Chimney Cap
Heavy-duty 24-gauge, 304-alloy stainless steel construction
Economical alternative to prevent downdrafts
For relining pipe and sealed-end, factory-built chimneys
*Will not cure non-wind related draft problems
**When using WindBeater on a fireplace flue - the WindBeater size you use must have a cross-sectional area appropriate for the fireplace
Manufacturers lifetime warranty
Size: 5" round inside flue
Cross-Sectional Area: 19.6 sq. in.

* Please Note: Masonry flues require a WindBeater Masonry Adaptor.

*Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.

The problem of downdrafts due to wind can be easily and economically solved with this WindBeater chimney cap. Made of heavy-duty stainless steel, and backed by a manufacturer's lifetime warranty, this chimney cap is built to withstand the weather over the years. This chimney cap is recommended for use with relining pipe and sealed-end, factory-built chimneys. When installing with relining pipe, insert the base of the cap as far as possible into the pipe and fasten it securely with screws. For sealed-end, class-A chimneys, insert the cap snugly into the chimney and seal the joint where the cap and chimney come together with silicone. Other installations may require special adaptors. End your wind-related fireplace problems with this WindBeater chimney cap from HomeSaver.