Empire Platinum Fireplace Burning Embers Media

No, the platinum embers are not listed for use with those sets.

These embers are only intended for use with select Empire gas fireplaces.  For a Real Fyre vented system, we would recommend the Platinum Bright Glowing Embers.

The embers are made of steel wool and fiberglass.

Yes, glowing embers can be used with vent free gas units.

At this time the only picture we have of this product is the one that depicts the product installed in a fireplace.

We would recommend using the platinum embers in conjunction with standard embers that would be included with the burner/log set.   The platinum embers are sold in very small quantities as this is the intended application.

No, our glowing embers are not for use in electric fireplaces.

These embers only offer an aesthetic improvement and do not increase heat output.

Only with certain Empire ventless gas log sets and fireplaces. With any ventless system, only the ember material listed in the installation manual under the "replacement parts" section should be used and will have to be placed exactly as described in the product literature. If different material is used, this may result in incomplete combustion and the release of carbon monoxide into your home.

Enhancement embers are just meant to go below the burner, although you can use a high heat glue to adhere them to the logs if your manual advises you may.

That is the correct amount. It is spread out evenly across the burner. Instructions are included for showing how to spread it properly.

We would not suggest these for your unit, as we are not a Heat & Glo dealer and none of our embers are tested or approved to be used with their units.

Unfortunately, this ember material may not be used atop any ethanol burner.

The embers or rockwool for any ventless hearth system will be a listed part number in the product literature for your fireplace or gas log set and you may only use this material as described in the installation manual. We will be happy to provide further guidance if you are able to locate the make and model number of your fireplace.

Glowing embers are not to be put directly on a set of gas logs.

For these embers to glow, they will need to be sprinkled onto the burner pan of your log set.

Because these embers are meant as a glowing accent material, one bag will be plenty for the 36 inch size of Tahoe fireplace.

Yes they can be used with the ventless fireplace when installed as a single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner.

Yes they can be used with the ventless gas log set when installed as a single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner.

If you have a vented gas fireplace, you may be able to use these embers. However, we recommend checking with your owner's manual for more information to be sure this is an acceptable accessory for your unit.

These embers need contact with flames in order to glow. Accordingly, it is best to sprinkle embers on the burner pan beneath the logs. However, some log sets have an elevated screen that is placed on the grate of the log set to serve as "platform" for these embers.