Part Number: ESVG18-2-24-12N
eFireplaceStore Item Number: PTS-ESVG18-2-24-12N
* Fireplace Size Requirements: The fireplace's Middle Width must be at least 26 Inches and the Depth must be at least 18 Inches for this gas log set to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.
* Please Note: This item is a vent free appliance and installation of it may be prohibited in your jurisdiction. Customers are responsible for checking local codes and regulations prior to purchase.
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Want your gas log fire to look like the real thing? You had better check out Real Fyre Evening Fyre Split Gas Logs before you look at anything else. Evening Fyre Split gas logs are Peterson's most realistic-looking gas log set ever. The most realistic-looking gas logs from the industry's most trusted manufacturer is a pretty bold statement, but the Evening Fyre Split gas logs live up to it. They have extremely authentic surface bark and split-wood face detail that makes them look just like the real thing. Plus, these gas logs are made from the same quality materials as other Peterson logs, they have the same steel reinforcement rods, and they feature the same superb craftsmanship. Real Fyre Evening Fyre Split Gas Logs by Peterson are truly the ultimate in taking the look and feel of an actual wood fire and recreating it in your own home.
This is a See Thru Gas Log set that comes with a Real Fyre G18 See Thru Ventless Burner. See thru gas logs will have a special burner that causes the flame to come from the front, back, and middle of the logs. The logs and grate are also the same width in both front and back. This burner and log set is made for See Thru or Peninsula Fireplaces Only.
This gas log set is a Vent Free Gas Logs Set. Vent-free gas logs (also called Ventless gas logs), which operate with the chimney flue closed, will not give you that roaring fire effect- the flame is not as realistic or as high as you'll find with vented logs. But, vent-free logs are an efficient heat source because 100% of the heat generated stays in your home. You'll often see vent-free logs referred to as "vent-free heaters" because that is essentially what they are. They consist of U-shaped burners with cement logs stacked on top of the heating element. Most sets have a thermostatic control that helps maintain a consistent room temperature. Vent-free heaters add moisture to the air, so it's important to install them in a room with proper ventilation to avoid formation of mildew.
Before installing any gas log system, check your local and state codes. In some localities, vent-free heaters are not permitted. Vent-free heaters are not permitted in bedrooms, bathrooms or recreational vehicles, and must be installed in an area where curtains, furniture, clothing or other flammable objects are at least 36 inches away from the perimeter of the heater. Vent-free heater installation also is not recommended in high traffic, windy or drafty areas.
This Ventless Gas Logs Set comes with Real Fyre Vent Free burner system, ODS safety system, pre-assembled valve, lava-fyre granules, glowing embers, custom grate, and connector kit.
This gas log set comes with a On/Off Remote Ready Pilot System. The pilot will stay lit at all times. The on/off remote ready pilot system allows you to control your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control. The flame will always be the same height.
Remote Control Options For This Pilot Kit: