Custom Firescreen Zero Clearance Tube Fireplace Heater

Hi Anthony, The Custom Firescreen tube heater line starts at 4 tubes, so a 3-tube grate is not manufactured in any of our series.

The 4-tube model that includes a blower kit is the Spitfire. It measures 19 inches wide by 14 1/2 inches deep by 7 inches high, with a leg height of 1 3/4 inches. This model is constructed from 16 gauge aluminized steel tubing and comes with a 75 CFM blower kit that has 18 inches of flex tubing. The blower box is designed to sit outside the firebox and directs room air through the flex tube into the heater; the warmed air then exits through the open front ends of the tubes. You can view the full setup in the Spitfire installation manual, and the product page can be found here: Custom Firescreen Spitfire Tube Fireplace Heater.

The Zero Clearance heater you are currently viewing is also available in a 4-tube size. However, it is sold as the heater only, and its corresponding blower must be purchased separately: Custom Firescreen Blower Kit for FH and ZC Tube Heaters.

To ensure the best fit, please provide the front width, back width, depth, and height of your fireplace opening. Also, let us know if the opening tapers towards the back. A tube heater should not be installed as a tight fit; typically, we recommend approximately 6 inches of clearance around the grate at the front, back, and depth before suggesting a specific size.