facebooktracking
Free shipping
Low Price
secure-order
View Cart
logo

    Duluth Forge 29 Inch Dual Fuel Vent Free Fireplace Insert

    822.95
    List Price: $1,009.99
    Sale Price: $822.95
    You Save: $187.04 (19%)
    In Stock.
    * Usually Ships Same Business Day.
    Configure item
    • Size: 29 Inches
    • Color: Black
    • Product Dimensions: 29" W x 23" H x 13" D
    • Heats up to 1,350 sq. ft.
    • Remote control included
    • Manufactured in the USA
    • 5 realistic ceramic fiber logs
    • Battery assisted Piezo ignition
    • Patented dual fuel technology
    • Comes in natural or propane gas
    See complete product details >>
    Choose Fireplace Insert Blower
    An electric blower will circulate heat from the chassis of the insert, increasing the speed at which the room is warmed.
    More Info
    • Product Features
      • Designed for Duluth Forge and ProCom Heating brand vent free fireplaces and fireplace inserts
      • Thermostatically controlled
      • Helps to circulate heat throughout the room
      • Easy to install and operate
      • Please see owner's manual for unit compatibility
      More Info
      ProCom Fireplace Blower - FIB100
      ProCom Fireplace Blower - FIB100
      (add $114.99)
      View Product Info
    Popular Accessories for this Item
    Product Details
    Manufacturer: Duluth Forge
    Part Number: 170032
    eFireplaceStore Item Number: DFO-170032
    UPC: 8.15192E+11

    Features

    • Size: 29 Inches
    • Color: Black
    • Product Dimensions: 29" W x 23" H x 13" D
    • Heats up to 1,350 sq. ft.
    • Remote control included
    • Manufactured in the USA
    • 5 realistic ceramic fiber logs
    • Battery assisted Piezo ignition
    • Patented dual fuel technology
    • Comes in natural or propane gas

    Technical Specifications

    • Maximum BTU Output: 26,000 BTU
    • Min/Max Natural Gas Inlet Pressure: 5"/9" WC
    • Min/Max Propane Gas Inlet Pressure: 11"/14" WC
    • Framing Dimensions: 28 7/5" W x 23 2/5" H x 12 7/5" D
    • Valve Type: Electronic Ignition (EI)
    * Please Note: This item is a vent free appliance and installation of it may be prohibited in your jurisdiction. Customers are responsible for checking local codes and regulations prior to purchase.

    If you are looking for dependability then look no further than Duluth Forge. The Duluth Forge Dual Fuel Vent Free Fireplace Insert - 26,000 BTU with Remote Control is the perfect addition to your per-existing masonry fireplace. This insert is manufactured in the USA, and comes with patented dual fuel technology. You can choose between natural or propane gas without needing a conversion kit. This insert comes with 5 realistic ceramic fiber logs, and includes a remote control. With the Piezo ignition system start-up is a breeze. So when you think of dependability think of Duluth Forge.
    Customer Questions & Answers
    9 Questions & 9 Answers
    Pat G
    from Grand Rapids, MI asked:
    May 26, 2020
    Is this the smallest ventless gas insert?
    1 Answer
    This is indeed the smallest insert we carry.
    Submitted by: Brennan W. on May 27, 2020

    Alice
    from Tullahoma, TN asked:
    March 31, 2020
    Can a blower be used with this model?
    1 Answer
    The optional blower is listed directly below the picture of the fireplace but here is a link to the blower.
    Submitted by: Kathy O. on April 1, 2020

    Bethany G
    February 19, 2020
    Can this model be used outdoors?
    1 Answer
    This may not be installed outdoors. Our outdoor fireplaces may be found here
    Submitted by: Will M. on February 19, 2020

    Paul D.
    from South Shore, KY asked:
    November 8, 2019
    Is there a surround available for this unit to trim it out to a 35 W x 25 H size?
    1 Answer
    Unfortunately, there are no surrounds available for this unit. We apologize for any inconvenience.  
    Submitted by: Brennan W. on November 8, 2019

    Kathi
    from Dowling, MI asked:
    October 27, 2019
    I have a fireplace that is 25" H x 36" x W x 20" D, and the back wall is about half the size of the front. Will this fit?
    1 Answer
    While the manufacturer markets this product as an "insert," it's actually a zero-clearance fireplace and should not be installed into an existing wood burning fireplace opening like a true fireplace insert. 
    Submitted by: Will M. on October 29, 2019

    Christy B.
    from Urbana, IL asked:
    October 15, 2019
    Our natural gas fireplace flame is very blue, not orange like the picture. Is there specific reason for this? Also, it seems to have a smell when it's on for 15 or 20 minutes.  Is this a "new smell" that will go away with use?
    1 Answer
    As I'm unable to locate an order in our system with your information, I recommend bringing this information to the attention of your installer or dealer. A mostly blue flame is not much of a concern as complete combustion will result in a blue flame, however, you should have your inlet pressure checked to ensure it's proper for the fireplace. Regarding the odor, any new gas hearth system will have an odor that should dissipate over time. Try running the heater on high for several hours with a window cracked to see if this helps.
    Submitted by: Will M. on October 16, 2019

    Karen F.
    from Puyallup, WA asked:
    September 30, 2019

    I have an old fireplace which is 29 1/2 inches wide x 241/2 inches high x 19 1/2 inches deep. Will this unit still work okay? Is there a trim piece to cover any gaps?

    1 Answer
    While the FDF300R will fit your opening (provided it does not taper and you can maintain the 29 1/2 wide for at least 14 inches of the depth), there is no trim kit available for this model.  You will likely need to have your own custom-made locally for a proper finish.
    Submitted by: Tyler M. - NFI Master Hearth Professional on October 2, 2019

    scott
    from Pearce, AZ asked:
    September 25, 2019
    I would like to place a fireplace mantle above this fireplace. Will this help with the heat protection and how high should the mantle be above the fireplace?
    1 Answer
    Please click here to view our fireplace hoods that will protect your mantel.  While the requirement for installing a mantel shelf above a masonry fireplace opening without a wood insert installed is normally 12" measured from the base of the mantel to the top of the fireplace opening, the installation instructions for the manufactured wood insert should be referred to for any additional clearance requirements. To answer your question, there is no nationally-accepted code requirement for installing a mantel above a wood insert.  If this is a gas unit, please refer to the manufacturer for the clearance.
    Submitted by: Kathy O. on September 26, 2019

    Gregory O
    from Minnesota asked:
    August 4, 2019
    Is the insert controlled by a thermostat?
    1 Answer
    This is indeed controlled by a thermostatic remote control.

    Submitted by: Brennan W. on August 5, 2019

    Customer Reviews
    test
    +

    Find the Right Gas Logs
    For Your Fireplace

    Gas Log Calculator Gas Log Calculator
    Back to Top
    Sign-up for our Email!
    Enter your email for new arrivals and special offers.