facebooktracking
Free shipping
Low Price
secure-order
View Cart
logo

    Ventinox 316-Alloy VFT 20-ft. Pre-Cut Liner - 10 inch Diameter

    964.95
    List Price: $1,189.99
    Sale Price: $964.95
    You Save: $225.04 (19%)
    In Stock.
    * Usually Ships within 5-7 Business Days.
    • VFT 20-ft. Pre-Cut Liner with welded seam construction for 10-in. pipe
    • .006" 316-Ti alloy 
    • For best performance, should be insulated with 2 wraps of 1/4" Foil-Face FlexWrap or a minimum of 1" TherMix for wood or coal applications to achieve the UL listing
    • UL Listed to the 1777 Standard for zero clearance to combustibles when properly insulated
    • Manufacturers lifetime warranty for wood, oil, pellet, and gas applications and 10 year warranty for coal
    See complete product details >>
    Product Details
    Free Venting Design & Quote:
    Manufacturer: DuraVent
    Part Number: 10VFT-X20
    eFireplaceStore Item Number: CPF-18724
    UPC: 662492811269

    Features

    • VFT 20-ft. Pre-Cut Liner with welded seam construction for 10-in. pipe
    • .006" 316-Ti alloy 
    • For best performance, should be insulated with 2 wraps of 1/4" Foil-Face FlexWrap or a minimum of 1" TherMix for wood or coal applications to achieve the UL listing
    • UL Listed to the 1777 Standard for zero clearance to combustibles when properly insulated
    • Manufacturers lifetime warranty for wood, oil, pellet, and gas applications and 10 year warranty for coal


    *Venting Requirements: This unit requires venting pipe with an inner diameter of 10 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
    * Please Note: This item can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled.

    *Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.

    Ventinox is a premium lightweight liner that is only 0.006" thick but is made with a continuous weld construction technique. This creates a spiral backbone that keeps it strong and flexible. This twenty foot section has a diameter of 10". This liner should be insulated with 2 wraps of 1/4" Foil-Face FlexWrap or 1" of TherMix in order to match the specifications for UL listing for wood or coal applications. It carries a lifetime warranty for wood, oil, pellet and gas application and a 10-year warranty for coal.
    Customer Questions & Answers
    1 Question & 1 Answer
    Dave
    from Charlottesville, VA asked:
    January 4, 2017
    Is insulation layer necessary if this liner is being used inside an existing masonry fireplace?
    1 Answer
    The insulation will most always be a required by the chimney liner manufacturer to maintain warranty. Also, it is recommended if the goal is to improve the performance of your hearth as the thin metal walls of corrugated stainless flexible liner will not insulate heated flue gases exiting the chimney, which may result in rapid creosote buildup, potentially damaging the chimney liner as creosote is highly corrosive. This is especially the case where the purpose of relining is due to the installation of a high efficiency wood insert with an existing terracotta flue that is much larger than the 6" liner the insert requires or with fireplaces with existing draft issues where relining is a corrective action.
    Submitted by: Will M. on January 4, 2017

    Customer Reviews
    test
    +

    Find the Right Gas Logs
    For Your Fireplace

    Gas Log Calculator Gas Log Calculator
    Back to Top
    +

    Let Our Experts Design
    Your Venting System

    Free Venting Design and Quote Free Venting Design and Quote
    Sign-up for our Email!
    Enter your email for new arrivals and special offers.